order placed at the beginning of this week... can't wait for it to get here
|
Any forum pricing for these cans?
|
any word on the catch cans that have been waiting for paint?
|
Are you guys still selling RX cans or is that over?
|
Are these back in stock yet? I ordered one weeks ago and I'm still waiting. No emails or word about it.
|
Originally Posted by RedC5Z
(Post 1583423954)
Are these back in stock yet? I ordered one weeks ago and I'm still waiting. No emails or word about it.
|
Can someone PM me exactly what I need, and the pricing for a catch can setup for a ls7 427 NA in a c5? I used the ls1 valve covers from the previous engine, and it has a Fast 102 on it.
|
Originally Posted by CoSpeed
(Post 1583424630)
Come on guys, don't make it difficult. Correct your statements. Everyone and anyone who has placed an order has been notified whether there is a delay with any orders.
I highly doubt anyone would wait 1-2 weeks on an order and not question it all this time and then jump on a bulletin board and post about it. Here's your reply Keith "No problem, The car wont be out of storage for at least 2 more months maybe 1 if im realllly lucky..LOL gotta love NY" Seriously, no emails or word about it? |
Originally Posted by CoSpeed
(Post 1583425378)
Sorry about the ad. We're back on track and all orders will ship no later than Monday for all Noriss cans. The Elites are ready same day/next day as always. If you have questions, just contact us direct. It isn't hard to get a hold of us. There is absolutely no reason to frustrate yourself and then post on a bulletin board. Just contact us if you have an issue.
|
I have been reading through most posts in this thread. I have a 418ci LS3 going in my car....hopefully within the next 2 months. Would i be better off going with the RX can over the Elite? Also, sicne i drive an 01ZO6, im a little confused on what year model to purchase. I will be using my valve covers but im pretty sure the valley cover on the LS3 is the LS2? Ahhh help:willy:
|
message sent through forum contact.
|
I wanted to order a catch can for my Z06 due to the fact I had a few questions before ordering. I called Elite Engeneering and left a voice mail requesting a return call. The following day I finally received a return call, however I missed the call because I was right in the middle of something at work and unfortunately couldn't answer the phone. Since then I have left three voice mails and two emails with no reply to either the voice mails or emails I sent over the last three days. Now it's the weekend so I'm sure I won't hear anything till Monday if I hear anything at all. This is pretty poor customer service if you ask me. Ridiculous and frustrating for sure. I'll be looking at alternatives and more than likely ordering with another manufacture this weekend. It seems Elite has no time for me! Thanks for nothing.
|
It actually has nothing to do with Cospeed. I apologize if it seemed that I was angry with you guys because that is not the case. I should have posted somewhere else. My apologies. I see you guys carry the RX cans. I may order one of those after I read up a bit more on them. My car N/A.
|
:lurk:
|
Installed mine. Good quality product.
Question: what fitting size would I need to put a permanent adapter on the drain hole? I'm thinking an adapter to a stainless line with a termination akin to my blower oil change line. |
We are still doing this. Please READ the first post and like our facebook for cool deals on parts and buy, sell, trade your used parts here LSX PARTS BUY SELL TRADE and here C5 CORVETTE PARTS BUY SELL TRADE and here C6 CORVETTE PARTS BUY SELL TRADE and here LTX PARTS BUY SELL TRADE and here C7 CORVETTE PARTS BUY SELL TRADE
https://www.corvetteforum.com/forums...ic174014_5.gif www.coloradoSPEED.com E-mail | facebook | QUICKESTLSX |
All times are GMT -4. The time now is 01:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands