Big Block Chevy forged, crank, pistons, 7/16 Dimple rods
 

396/427 Std –Std 6223 Forged steel crank
I have a std std 396/427 (6223) forged steel crank that is in very nice condition.
Asking $ 425.00


396/427 20 – 20 6223 Forged steel crank
I have a 20 - 20 396/427 (6223) forged steel crank that needs to be cut 10
Asking $200.00


Big Block Chevy forged pistons and 7/16 Dimple rods
I have a set of eight big block Chevy factory hi-performance forged GM TRW pistons and 7/16 dimple rods. The rings and bearings are new.
GM Pistons 3888304 std Compression would be between 11.2 and 11.5 depending on chamber size, quench, gasket thickness, etc... That is with Closed chambers of 108 to 110 cc. Dome is about 23 cc. With a set of set of factory open chamber heads it will drop your compression by about 1.3. So you would wind up with a very friendly 9.8 to 1. LS6/LS7/L88/ L-72.
Asking $675.00


Big block Forged pistons
I have eight forged TRW L2229 std bore pistons and I think these are about 11 to 1.

Asking $100.00

Big Block Chevy 7/16 Dimple rods New
I have a new set of eight big block Chevy factory hi-performance 7/16 dimple rods. These are new not reconditioned and are the rods for LS6/LS7/L88.

Asking $450.00 OBO


Trades: Looking for 850 vac sec Holley, Roller cam kit for 496.

Redmanf1,
I have some questions about your 427 engine parts please contact me when you can.
Thanks
Dan
248-752-5116