David the guy who sells parts
He is not on the forum, however a CF member gave his number to me and he has some parts I need, I lost his tel number and need to contact him
Thanks Geoerge :thumbs: |
David Crane? Run away.
|
parts man
I don't know if it was you I spoke to over the phone a few days ago or not, but I did refer a gentleman looking for parts to David Sokolowski. He is located in Gardena, California His phone number is 310 329 5334 He deals with 63-67 parts. I have only seen advertising from him on Hemmings motor news. This might not be the person you were referring to, but he will have any parts that you are looking for.
Good Luck, Ed Smith |
parts
I am actually going to David's place today to look for some valve covers. If you let me know in the next few hours what you are looking for, I will try and check. David would not try to sort what he had to find the covers I need, but said I could come look myself, so I am going a little early for a meeting and will stop by his place in Gardena.
|
Originally Posted by RobMorgan
(Post 1573593283)
I am actually going to David's place today to look for some valve covers. If you let me know in the next few hours what you are looking for, I will try and check. David would not try to sort what he had to find the covers I need, but said I could come look myself, so I am going a little early for a meeting and will stop by his place in Gardena.
Need this stainless fro 63 coupe in and out except out sied of rear window need drives side vent assembly need pass vent glass clear need driver door glass clear need steering "U " bracket and gthe bracket that goes in cfront of it. George 225-202-0078 |
Parts
George,
Did you get things worked out with David. He has just about everything under the sun at his place, but how he finds it, I have no idea. I spent 3 hours looking through valve covers to find what is the best set I have been able to locate in 4 months of looking. I know he had discussed your trim, so if he says he has it, i am sure he does. |
formerly known as "hippie Dave"
|
Originally Posted by RobMorgan
(Post 1573604011)
George,
Did you get things worked out with David. He has just about everything under the sun at his place, but how he finds it, I have no idea. I spent 3 hours looking through valve covers to find what is the best set I have been able to locate in 4 months of looking. I know he had discussed your trim, so if he says he has it, i am sure he does. George:cheers: |
Parts
He did seem like a good guy to me, has an unbelievable amount of parts and not much incentive to sell them, yet his prices were reasonable. He said he is trying to buy a 30K sq ft warehouse. If he does and gets the stuff organized, it will be a great resource for pretty much anything a person could need.
|
David once told me if he had invested the money he spent on Corvette parts on LA real estate he would be a millionaire....and your right, nice guy.
|
All times are GMT -4. The time now is 07:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands