so black A4s with lumbar support would cost 400? how about shipping?

Yes they are 400 each and shipping is free when a pair is ordered

Thanks for the orders guys:thumbs: Any one else want a set?:D

Here's a set of FX1 Pros we just installed in a 08 C6Z... while retaining the power controls AND eliminating the air bag light :cheers:




http://lh3.ggpht.com/_Pr1HDxmqMPM/TJ...0/P1060437.JPG

http://lh6.ggpht.com/_Pr1HDxmqMPM/TJ...0/P1060440.JPG

http://lh6.ggpht.com/_Pr1HDxmqMPM/TJ...0/P1060441.JPG

http://lh5.ggpht.com/_Pr1HDxmqMPM/TJ...0/P1060442.JPG

http://lh5.ggpht.com/_Pr1HDxmqMPM/TJ...0/P1060443.JPG

http://lh3.ggpht.com/_Pr1HDxmqMPM/TJ...0/P1060444.JPG

http://lh3.ggpht.com/_Pr1HDxmqMPM/TJ...0/P1060447.JPG

Thats the ticket...

What was purchased to get the power module on the drivers side to work with these seats.....

how much were those seats brackets etc...and how long did it take to install them.

Nice setup.

thanks for posting the photos of the power seat track and your seats..

I got Corbeau FX1 pro seats and Arizen side mounts bracket that sit on the stock rails (power or manual). Brackets are $100 a piece I think (check Arizen site).
For seats and install, check with Mike: he will get you a good price I'm sure ;-)

Oh, get the microsuede finish, it's $50 more/seat, but well worth it! Looks much richer and nicer than the standard black cloth finish. I'm thinking about having the back and bottom cushions I (they come off easily) reupholster using similar Sienna color perforated leather that was on the stock seat.

-Matt

Do they make the FX1 Pro in full leather?

No, they don't. But honestly, the microsuede is even nicer to me.
Plus often, aftermarket seats in leather come with cheap leather...
Best is to get microsuede and then have the cushions reupholster with your choice of leather. there are 3 cushions: back, bottom and front bottom. You can actually take off the microsuede cover off the cushion, so you can reupholster the actual cushion only.I'm thinking of doing the back and bottom in perforated leather just like the stock 3LZ seats. Will look good with the microsuede I think.

So who else would like to upgrade their seats from stock to something ALOT better? :thumbs:

would love to, but need to find some to try out in RI/MA/CT area...

Anybody got some A4's ?

how wide are the widest seats that fit on a c6. i am a heavy set guy and would like to know if i would even fit in them.

If you have a larger than 38" waste you will not fit them.

So who else would like a set? :flag:

Bump :thumbs:

how strong are this seats?
any testing done to them

i need to buy seats not sure what to get

are they as strong and safe as sparco?

We have not had any issues with Corbeau seats with durability at all. I have no problem comparing them favorably to Sparco... Sparcos are about twice the price

Thanks for the orders! We'll be shipping them out early next week!

A4 price
 

OK need price for A4's in black leather lumber and heat warmers shipped to 08831 pm price also the brackets for a C6Z06, question can the stitching be done in yellow?

This combination sounds nice... if its available send me a price as well... 02906 (no seat warmers, I dont drive it in cold weather)

PMs sent