Originally Posted by 5 Liter Eater (Post 1574947987)

I thought I did but a little more detail wouldn't hurt.

- Remove gauge surround by pulling on it as shown in the link on page.
- Remove the DIC controls by unscrewing the two or three phillips head (may be torx, can't remember) screws on each one.
- Pry the clips apart to open the case.
- Cut the old bulbs out
- Solder in the new ones

Originally Posted by 5 Liter Eater (Post 1574036848)

Just picked these up at the Rat Shack. I'll see if they work tonight or tomorrow. And yes, that is a wireless Z06 mouse. :thumbs:

http://i346.photobucket.com/albums/p...00511-0940.jpg

Originally Posted by kennasdad (Post 1578293406)

Thanks, did this tonight worked great:cheers: