FS: 1970 LT1 3927186 big valve heads
1970 LT1 3927186 Camel Hump heads Date codes are D10 and D70
Heads have been completely reworked and tested. They were installed on my 406 short block but never fired. Just got them from my machinist today, they were removed to make room for new AFR195 heads. Pictures are posted below. 2.02/1.60 valves screw in studs, guide plates and 64cc combustion chambers. Hot tanked, magnafluxed, bead blasted, pocket ported, 3 angle valve job, new retainers, locks, springs, bronze guides, positive seals, o rings Price is $750 OBO if you pay shipping $800 if I pay. I am located in upstate New York 2.02 / 1.60 valves http://i596.photobucket.com/albums/t...e/DSC01826.jpg Springs, screw in studs, guideplates http://i596.photobucket.com/albums/t...e/DSC01830.jpg Double hump markings http://i596.photobucket.com/albums/t...e/DSC01832.jpg Date code #1 http://i596.photobucket.com/albums/t...e/DSC01827.jpg Date code #2 http://i596.photobucket.com/albums/t...e/DSC01828.jpg Formerly installed on this 406 short block - engine was never fired http://i596.photobucket.com/albums/t...e/DSC04270.jpg |
bump
|
bump
|
Hello I want to get the LT1 3927186 big valve heads to my 77 vette l82 engine . can be used to my car or not ?and how the price for it ?
|
Originally Posted by mr.hook
(Post 1569568652)
Hello I want to get the LT1 3927186 big valve heads to my 77 vette l82 engine . can be used to my car or not ?and how the price for it ?
To the OP......I would go ebay w/them,bud.You'd have better luck there as the Camaro guys also,chase these.:cheers: |
Did you ever sell these?
|
186 Heads
Are these heads still available?
|
All times are GMT -4. The time now is 10:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands