CorvetteForum - Chevrolet Corvette Forum Discussion
Page 2 of 2
1
2
Show 100 post(s) from this thread on one page

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C5 Forced Induction/Nitrous (https://www.corvetteforum.com/forums/c5-forced-induction-nitrous-86/)
-   -   Best cam for stock LS1 block with good lope at idle (https://www.corvetteforum.com/forums/c5-forced-induction-nitrous/1664104-best-cam-for-stock-ls1-block-with-good-lope-at-idle.html)

hotrod03 04-01-2007 01:40 PM
Originally Posted by Chris@East Coast Supercharging (Post 1559607475)
This was done on our forged 346. I could get 800 out of a stock bottom end but I would probably only get one dyno run before it went kaboom :D
Chris, Can my stock lS1 handle the Novi 2000 (500rwhp) bottom end wise.

FreddyG 04-01-2007 01:44 PM
Will it work with #918 springs?

peter pan 04-01-2007 02:13 PM
Originally Posted by mike76002 (Post 1559611922)
Thanks Steve!
Wanna sell me that cam and get Chris' cam for you :D?

Chris, how much is your cam?
:cheers:
-Mike
Mike, if my car was in for upgrades yes I would do it, but I do not have a reason to mess with it as it runs great and this was put together before the ECS boys came out with there cam that is working so well with our 346's and blowers:thumbs: :thumbs:

vetterlatethannever 04-05-2007 09:44 PM
Originally Posted by Chris@East Coast Supercharging (Post 1559628653)
This cam in Dougs vert with a 346 and our Paxton kit went 117.5 mph in the 1/8. :)
1/8th :crazy:

Would I need to change cams for F/I? Currently running MTIs G1 @ 228 232 .588 .575 113

peter pan 04-05-2007 10:24 PM
Originally Posted by vetterlatethannever (Post 1559693675)
1/8th :crazy:

Would I need to change cams for F/I? Currently running MTIs G1 @ 228 232 .588 .575 113
No you would not have to, but it is better to overlap on the exhaust a little and yours does not, so to get better results ya change the cam:cool:


All times are GMT -4. The time now is 09:08 AM.
Page 2 of 2
1
2
Show 100 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands