"Callaway" DYMAGS...
I am in Australia, which means sourcing things like this is VERY hard, but is it still possible to get those DYMAG wheels?? If so, what kind of $$$ (USD will do) for a set?? And what kind of info should i know about these particular wheels? Apart from the fact it will make my 94 Corvette look like 1 of the other 2 Callaway Corvettes in Australia... (Thats right yeah,there is apparently only TWO Callaway C4s known to be in this country, 1 is a 91 twin turbo with Aero body, and not sure on the other one,but it is twin turbo and has standard body)
|
I am unable to answer your question although I know it will not be cheap. Try an e-mail to Jason: parts@vette2vette.com
I am going to Bloomington Gold at the end of June. They have a huge swap area there. I will keep my eye out for a set and send you the info if I find any. How are things in the land of Oz today? Edit: Here is a pic of one of the Callaways with Dymags at last year's Bloomington Gold show. Enjoy! http://im1.shutterfly.com/procserv/4...108AbMmzZk4Zti |
They are made of magnesium, which make them ultra light. They are 10" wide except for a few that were made with the ZR1 offset. Price can range. It's not uncommon to pay about 4k for a set, if you can even find them.
http://home.comcast.net/~corvette.co...2/site1135.jpg |
thanks for the pic, and thanks also for the info... Do you have any idea how much $4,000 USD is in AUD??? by the time i get them here, we are talking AT LEAST $6,000 Australian dollars at that price!!! By the way corvetteronw, things were really good here in Australia yesterday, its just after midnight on here at the moment, quite cool outside, very clear night, weather has been perfect for the last week or so,and so far looks good for the next week too. Saturday morning here now mate.
|
The exchagne rate today is:
FXConverter - 164 Currency Converter Results Friday, May 27, 2005 1 US Dollar = 1.31853 Australian Dollar 1 Australian Dollar (AUD) = 0.75842 US Dollar (USD) |
Originally Posted by Gary96LT4
The exchagne rate today is:
FXConverter - 164 Currency Converter Results Friday, May 27, 2005 1 US Dollar = 1.31853 Australian Dollar 1 Australian Dollar (AUD) = 0.75842 US Dollar (USD) |
You probably already know this, but some will say Dymag/Callaway while others will say Dymag/Corvette.
These were also the wheels used during the Corvette Challenge race. Also the wheel used on the ZR1 when it broke the 50+ year long 24 hour endurance record. http://home.comcast.net/~corvette.co...2/site1054.jpg |
Yep, i did know the 88 challenge cars had DYMAGs on them too, but i never knew they said Corvette instead of Callaway.. Thanks heaps for that info,thats handy to know.
|
Drop this guy a line and see if he still has them:
3/5/05 SELLER=(NJ) PHONE=856 223 9270 EMAIL=martinepinder@yahoo.com DYMAG Wheels - QTY 4 Perfect Condition, no scrapes or scratches, less than 7,000 fair weather miles on them. VERY RARE and Expensive. From a Doug Rippie conversion. Call or Email for information. |
for that kind of coin.. go with a nice set of 19 HRES 10 wide front 12 rear and you'll make those dymags look like theyre from the 60s ;) :rofl:
|
Originally Posted by DieL
for that kind of coin.. go with a nice set of 19 HRES 10 wide front 12 rear and you'll make those dymags look like theyre from the 60s ;) :rofl:
HRE are an obvious aftermarket look. DYMAGs look like factory wheels cause they were optional on some cars. i much prefer to keep a factory apearance (or close to) rather than change things like that. |
Originally Posted by Casethecorvetteman
HRE are an obvious aftermarket look. DYMAGs look like factory wheels cause they were optional on some cars. i much prefer to keep a factory apearance (or close to) rather than change things like that.
Not only that but Dymags are worth their weight in gold. Will be more so in the future. |
Originally Posted by 8388
Not only that but Dymags are worth their weight in gold. Will be more so in the future.
Damn straight,and with only 2 Callaway Corvettes in this whole entire country,they would be just that much more of an investment id imagine.... |
Can you still buy the aero body for the C4s??
|
Originally Posted by Casethecorvetteman
Can you still buy the aero body for the C4s??
let me invite you to a place where all your Callaway questions can be answered. This site is frequented with the most dedicated Callaway enthusiast around. http://www.corvetteactioncenter.com/...play.php?f=134 |
Originally Posted by 8388
let me invite you to a place where all your Callaway questions can be answered. This site is frequented with the most dedicated Callaway enthusiast around.
http://www.corvetteactioncenter.com/...play.php?f=134 Very good stuff there 8388, i think the Callaway Corvettes look great, and even if i only made my 94 "look" like an Aero body, it would be something very special in this country... |
I've got the Challenge Dymag/Corvette wheels on mine. Bought the in 1988 from Mid America for $725 each. That didn't include the center caps.
http://www.corvetteforum.net/c4/rayq...s/rayvette.jpg http://www.corvetteforum.net/c4/rayq...s/bigbrake.jpg |
Ray! You're alive!
We missed you again at the Cruise In. WHere you been bud? |
is there a place to buy center caps? I've found a set of wheels but no center caps and I was wondering what kind of $$ I'll be looking at paying for the centers
|
Originally Posted by ToyC4
is there a place to buy center caps? I've found a set of wheels but no center caps and I was wondering what kind of $$ I'll be looking at paying for the centers
|
All times are GMT -4. The time now is 05:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands