FS Several sets used headlights for sale
SEE LAST POSTS FOR UPDATES TO THIS THREAD FOR AVAILABILITY.
Black sets available 1080.00 pair shipped (US) All with new lens installed. Shipping is additional. Black Available on a continuous basis Other colors available as I get them. :cheers: |
Robert, are you doing core exchanges on sets that are crazed/pitted?
Thanks! -Ronnie |
Core charge doesn't apply to these lights as they are a straight out purchase. You retain your existing lights or sell them to me or anybody for that matter.
I offer 200.00 for your set with lens damage. Other damage can/will affect the price. :cheers:
Originally Posted by TNTC4VETTE
(Post 1578496161)
Robert, are you doing core exchanges on sets that are crazed/pitted?
Thanks! -Ronnie |
^ interested to know the answer to this as well. I'm wanting the black headlights for my car but would prefer to keep the OE ones as backup.
|
Originally Posted by Justinjor
(Post 1578496521)
^ interested to know the answer to this as well. I'm wanting the black headlights for my car but would prefer to keep the OE ones as backup.
I'll edit my post as a core charge doesn't apply in this type of purchase. The buying of the old lights are the same offer as in my previous post. |
Originally Posted by RLSebring
(Post 1578499163)
Adding RT only Cobalt Red 475.00
Black 1080.00 up to 3 sets available 1 Set SOLD |
Originally Posted by 5.4ever
(Post 1578499816)
Is cobalt red the same a precision red? i dont recall a cobalt red as a corvette color
|
Originally Posted by RLSebring
(Post 1578499859)
I'd have to check what year colbalt was but it will be different than percision red.
|
Originally Posted by 5.4ever
(Post 1578500137)
Cool. There isnt a Cobalt red corvette(its an interior color only on c6s), and after looking it up, im sure that the cobalt red will come back as a paint code for Precision red. If this is accurate, then I may need that HL. Thanks
I'd like to find a good color chip set. Some of these lights are so close that I'd like to verify beyond a doubt. |
Top notch vendor here. Highly recommend. :thumbs:
|
Originally Posted by RLSebring
(Post 1578500603)
I'd like to find a good color chip set. Some of these lights are so close that I'd like to verify beyond a doubt.
|
Originally Posted by RLSebring
(Post 1578663110)
Thanks guys.
I've been trying to remember to write down the color when there is a tag still on the bottom of the light. I always say I can remember but after a few sets taken apart and lying around for several days it's suddenly what was that color. I usually paint them all black but ocassionally somebody or a body shop will call lookingfor a specific color and I'm all http://images.ibsrv.net/ibsrv/res/sr...lies/crazy.gif trying to remember. |
I would like a set of Cyber Gray if u wanted to paint a black set u have. Thanks
|
Originally Posted by frc
(Post 1578694249)
I would like a set of Cyber Gray if u wanted to paint a black set u have. Thanks
I'll PM details. Thanks Robert |
:cheers:
Originally Posted by RLSebring
(Post 1578694877)
No Problem and good timing. I just took a bunch of bezels to the paint shop Monday so it will be easy breezy to have a set paint CG. It will be about a week or so before I get them back.
I'll PM details. Thanks Robert |
Originally Posted by RLSebring
(Post 1578781260)
Cyber Grey and Blade Silver back from paint this afternoon. Should ship both Tuesday.
Shall I post pics? |
Hi Robert,
Expecting those pair of blade silver are mine being shipped tomorrow? Thanks, Lloyd |
Originally Posted by turbod
(Post 1578804465)
Hi Robert,
Expecting those pair of blade silver are mine being shipped tomorrow? Thanks, Lloyd |
Got my Cyber Gray lights. They look great. Thanks
|
Originally Posted by frc
(Post 1578876315)
Got my Cyber Gray lights. They look great. Thanks
:thumbs: |
Great Vendor
Robert did a great job on my Blade Silver headlights. Highly recommend his work. An example of my recent modification. I kept my original Cyber Gray lights.
http://i1213.photobucket.com/albums/...5/DSC_0587.jpg http://i1213.photobucket.com/albums/...5/DSC_0588.jpg Thanks Robert! |
That is sweettttttt.
|
1 pair still available 10/22/2011
|
Originally Posted by turbod
(Post 1578880689)
Robert did a great job on my Blade Silver headlights. Highly recommend his work. An example of my recent modification. I kept my original Cyber Gray lights.
http://i1213.photobucket.com/albums/...5/DSC_0587.jpg http://i1213.photobucket.com/albums/...5/DSC_0588.jpg Thanks Robert! |
How much would you give me for my victory red lights in perfect condition as a trade for a black pair?
Thanks, Austin |
Originally Posted by acscogginjr
(Post 1579055505)
How much would you give me for my victory red lights in perfect condition as a trade for a black pair?
Thanks, Austin I usually only buy lights with damaged lens as I will change the lens and paint the bezels black in the process. Can't really afford to take a nice pair apart and do what I do and make any money. Colors other than Black and Cyber Grey generally bring about 600 to 800 here on the forum. I can take yours and paint them paint them black and install new lens for 800.00 Sorry I can't be of more help. |
Hey Robert, you going to make it to Griffin?
|
Originally Posted by Andrew6
(Post 1579056195)
Hey Robert, you going to make it to Griffin?
We can come by and visit for a little before having to head on up to Marietta. We'll be heading back out of Atlanta around 2 or so Sunday to come home. |
Originally Posted by RLSebring
(Post 1579056890)
If anybody is going to be around. We are leaving Pensacola around 2pm so that will put us coming into South Atlanta around 8ish with the time change.
We can come by and visit for a little before having to head on up to Marietta. We'll be heading back out of Atlanta around 2 or so Sunday to come home. |
Originally Posted by Andrew6
(Post 1579071438)
:thumbs: Folks should come see you're headlights ;) very tough
|
Originally Posted by RLSebring
(Post 1579073412)
I rounded up some German Halo's that I am going to flush mount in the carbon. Plan to start probably in Nov. If it turns out right they should be bad azz.
|
Originally Posted by RLSebring
(Post 1579073412)
I rounded up some German Halo's that I am going to flush mount in the carbon. Plan to start probably in Nov. If it turns out right they should be bad azz.
|
Originally Posted by labworm
(Post 1579073437)
interesting ? a retro fit?:lurk:
I at least either paint the silver trim or just remove the trim and mount the bezel to the face of the bezel. The ones I located are the correct size of the opening and lend themselves to be mounted on the surface much better. I'm going to recess them into the carbon fiber so that only the face of the halo shows. I am anticipating the look should be, at least, better than a make do or afterthought.
Originally Posted by Andrew6
(Post 1579073442)
:cool:
Better flush finish with out trim rings http://i342.photobucket.com/albums/o...g/IMG_0820.jpg One being toyed with... http://i342.photobucket.com/albums/o...g/IMG_0916.jpg Lighted, The jake needs some work for clarity. http://i342.photobucket.com/albums/o...g/IMG_0917.jpg |
on the wish list
|
Ya'll think a halo inside the turn lens would be too much? Maybe use the halo as the running light and turn signal eliminating the stock bulb...
|
Originally Posted by RLSebring
(Post 1579073660)
Ya'll think a halo inside the turn lens would be too much? Maybe use the halo as the running light and turn signal eliminating the stock bulb...
|
Originally Posted by RLSebring
(Post 1579073660)
Ya'll think a halo inside the turn lens would be too much? Maybe use the halo as the running light and turn signal eliminating the stock bulb...
I know the fake audi led drl strip is often done poorly but I would love a classy implementation. |
I missed it, the halos are in carbon fiber head lights? the pics look flat black. How much for CF head lights with halos? Very cool by the way! Ill be picking up a set of these soon!
|
2 black sets available and a couple of right side available. All with new lens installed. |
Originally Posted by 383
(Post 1579202427)
I missed it, the halos are in carbon fiber head lights? the pics look flat black. How much for CF head lights with halos? Very cool by the way! Ill be picking up a set of these soon!
The pics are flat. Later into the winter I'll be recessing halos into my carbon fiber bezels. As far as I know no one is really doing anything with fiber. Just not worthwhile resale wise. |
Originally Posted by RLSebring
(Post 1579227381)
The pics are flat. Later into the winter I'll be recessing halos into my carbon fiber bezels.
As far as I know no one is really doing anything with fiber. Just not worthwhile resale wise. |
Originally Posted by 383
(Post 1579227409)
Do you have a price for the black lights with halos?
I guess I need to get a pencil out and see what will work out. |
Originally Posted by RLSebring
(Post 1579227475)
The ones I've did so far the customer has provided the halos. I have installed the expensive Light Werkz (250 to 350 set(4)) and I've installed the CCFLs. I've only installed them while replacing the lens too.
I guess I need to get a pencil out and see what will work out. |
Originally Posted by 383
(Post 1579236376)
You come up with a good price on some black lights with flush halos and I'm smashing the penny jar at my grampas house!
|
Bookmarked
|
Lemans Blue availabe New lens 1080.00 shipped US 11/23/2011
|
Got in a number of lights the last few days. Name your color...
|
Halo's?
|
Originally Posted by acscogginjr
(Post 1579055505)
How much would you give me for my victory red lights in perfect condition as a trade for a black pair?
Thanks, Austin |
Originally Posted by RLSebring
(Post 1579335210)
Got in a number of lights the last few days. Name your color...
|
I have 1 LH victory red or can have a set painted for you. 1080.00 shipped including new lens.
|
Originally Posted by 383
(Post 1579336642)
Halo's?
I have a set sitting here waiting for my lights. I thought it would slow down some but it hasn't, Not complaining though... |
bump
|
Originally Posted by RLSebring
(Post 1579354254)
I have a set sitting here waiting for my lights. I thought it would slow down some but it hasn't, Not complaining though...
|
:lurk:
|
Originally Posted by 383
(Post 1579360358)
Are you still working out a price for the halo install?
|
Originally Posted by RLSebring
(Post 1579337547)
I have 1 LH victory red or can have a set painted for you. 1080.00 shipped including new lens.
|
Originally Posted by NospdLimit
(Post 1579372297)
I am going to try and clean inside the lens. I don't have lenses that are discolored, my Z06 only has 6000 miles on it and it has spent its life in a garage, they just have dust inside. Any tips on cleaning the inside?
ps. DON'T SCRATCH THE INSIDE OF THE LENS! If you use compressed air be careful the hose acts like an unmanned fire hose while in there and it'll scuff the lens. Ask me how I know.
Originally Posted by RLSebring
(Post 1579371395)
I just haven't had the time which leads to me to believe that if I don't have the time I better not sell any until I do have the time.
|
The inside of the lens are a booger bear. The inside doesn't have the same protective coating that the outside has and is very easy to scratch and mar. Other than air I would not attempt to actually touch the inside surface or if you do keep me in mind for the replacements.
|
Originally Posted by 383
(Post 1579385709)
Looks like your new business is doing pretty well! I'm in line for a set with halos! Keep us posted.
Look around eBay and see if any of the Halos offered suit what you are looking for. I may be able to do a set in your color more at my leisure then just do a core swap out. The labor will probably remian in the 275. range then figure lens and if you plan on changing color. It can add up quickly though... |
Originally Posted by RLSebring
(Post 1579387038)
The headlights and lens have been a hobby for the most part for the past few years. I have my real job that comes first. I may have to look into turning this into more of a business though as it is growing.
Look around eBay and see if any of the Halos offered suit what you are looking for. I may be able to do a set in your color more at my leisure then just do a core swap out. The labor will probably remian in the 275. range then figure lens and if you plan on changing color. It can add up quickly though... |
Thanks for the advise,
It doesn't sound like cleaning the inside going to likely work. |
Originally Posted by NospdLimit
(Post 1579392856)
Thanks for the advise,
It doesn't sound like cleaning the inside going to likely work. |
Originally Posted by 383
(Post 1579392585)
What were the sizes you used in the pics? Is there a decent vendor that sells different halo sizes?
I made backing plates for both rings, attached to the bezels then glue the rings to the backing plate. A lot of work. The ones from Germany fit much better and look like they may mount directly to the bezel and the size is closely proportional to the size opening of the low and high beam openings. There's several vendors on Bay but I haven't looked into most of them. Prices range from 75. to 300. so the quality probably enters the picture. |
Originally Posted by NospdLimit
(Post 1579392856)
Thanks for the advise,
It doesn't sound like cleaning the inside going to likely work.
Originally Posted by 383
(Post 1579396360)
It bugged me so bad (my buddies knew it so they constantly busted my balls)I had to do something. If the tube thing scares you just try using compressed air past the lights. If it is just dust that may actually work.
|
I'm interested in the Carbon fiber with some angel eyes on the headlights. Robert is the MAN! and does awesome headlight work. :rock::cheers:
|
I sent u a pm about my headlights I bought from you i will be waiting for ur response thanxs
|
Originally Posted by Andrew6
(Post 1579396572)
I'm interested in the Carbon fiber with some angel eyes on the headlights. Robert is the MAN! and does awesome headlight work. :rock::cheers:
I wonder if the bezel can just be skinned with carbon from a diy kit? |
Originally Posted by 383
(Post 1579422949)
I too was interested in carbon fiber but I heard that the carbon looks like its just black paint unless your up real close. anyone seen them in real life?
I wonder if the bezel can just be skinned with carbon from a diy kit? I have also had them hydro carbonned and while they looked real good it wasn't great. Mine are carbon and in the bright sun or within about 10' you can tell they are real carbon. Any further away and they do tend to appear just black. http://i342.photobucket.com/albums/o...g/IMG_4800.jpg |
How did you lay the carbon with a vacuum bag or a wet lay up? I love that look but they are crazy expensive.
How much would you charge for a set of lights I could work on myself? They wouldn't have to match and I could replace the lens myself after I lay carbon on them. |
Interesting you'd ask about DIY. I have been rolling that around in my head for the past weeks to offer a set of lights in need of rehab along with a set of new lens. Let me see what I can work up that would make sense.
On the layup I have did the wet layup, PrePreg and vaccuum infusion. The wet layup was by far the most costly in terms of waste and labor. Just a nasty job. The vaccuum infusion was by far the most cost effective but disastrous in not being able to really see what you're doing. Most materials it's not a problem as you'd have gelcoat or non bias materials you're working with. The prepreg was best but way more expensive. It conformed right to the shape and keeping the matrial on bias was not problem. Get it placed and set in the oven or sun for a few minutes and you're done. It made for a nice overlay then you could clear it to your personal prefference.
Originally Posted by 383
(Post 1579429100)
How did you lay the carbon with a vacuum bag or a wet lay up? I love that look but they are crazy expensive.
How much would you charge for a set of lights I could work on myself? They wouldn't have to match and I could replace the lens myself after I lay carbon on them. |
bump
|
Originally Posted by RLSebring
(Post 1579396452)
Didn't mean to scare you from trying it. Just need to be careful. I would definately use air only first and see what results that produces and go from there.
Let me know if you get a Victory red right side |
Originally Posted by NospdLimit
(Post 1579457040)
Thats cool I apreciate the advise, the dust is really not that bad, I am just really pickey about the Z, :crazy: it only has 6000 miles and looks like new inside and out.
Let me know if you get a Victory red right side |
Rlsebring has grade a service this guy really takes care of his customers I bought 2 new installed n removed lens were in excellent condition with just a few glue specks well I cleaned the inner lens with mineral spirits n messed it up cuz I didnt no any better pretty much this member hooked me up on a brand new lens for a great price n made me happy again great seller dont have any worries he sells good lens and has awesome customer service thanxs again man
|
Originally Posted by RLSebring
(Post 1579457122)
I got a RT red in today. It's either Victory Red or Colbalt. I'll get the color chip out tomorrow and let you know.
|
Originally Posted by RLSebring
(Post 1579465180)
It would appear to be Victory red. $550.00 with new GM OEM Lens installed and including shipping.
|
black headlamps
Originally Posted by RLSebring
(Post 1579484687)
bump
|
Hey how much for just the two lenses. I need a left and right. Thanks
|
Several sets available
|
Hi, I have a question how much would it be for me to take out my VY headlights and ship them to you to have them painted black. Would save me some
Money instead of buying all new black ones id imagine, do you do somthing like this or no ? And what would the turn around time be ? |
3 options
Send me your lights. It will require new lens in the process. With lens and paint it runs ~800. including return shipping. I can sell you new lens with instructions on how to change them. While they are open have a local paint shop paint you bezels. Would save the most money. Lens run 339.00 shipped pr. Buy a set of my used black with new lens installed for 1080. then sell yours on here or eBay to offeset the cost. IF I do it I'd need about 10 days roughly. |
I hooked up the Halo lights you sent me to a 9Volt Battery on Friday and When I got home this morning they were still on. Those suckers must use no power whatsoever
|
Originally Posted by Andrew6
(Post 1580023872)
I hooked up the Halo lights you sent me to a 9Volt Battery on Friday and When I got home this morning they were still on. Those suckers must use no power whatsoever
BTW your cores showed up yesterday, Thanks :cheers: |
Originally Posted by RLSebring
(Post 1580028753)
That'sgood to know. They won't put any stress on th stock lighting circuit.
BTW your cores showed up yesterday, Thanks :cheers: |
Indeed they do. Must look tremendously better now. Time to get on that wide body...
|
Originally Posted by RLSebring
(Post 1580048397)
Indeed they do. Must look tremendously better now. Time to get on that wide body...
|
Corvette Recycling have some fairly reasonable...
|
How difficult are they to install?
|
Originally Posted by HKILP7M8
(Post 1580079891)
How difficult are they to install?
Not too bad. Most are able to remove and install the lights in 2 to 3 hours. I have good instructions I include with the sale. Basically remove enough screws from the fenders and top of front bumper to create enough space to get the lights out. Local dealer usually allows 2 or so labor hours to do this for you as well. search the General Section of the forum. Type in black headlights and you should get more than enough info from those that have posted their results. See Forum Member Thrash posted thread. |
Do you have any pics of a Jetstream blue w/black headlights? I'm toying with the idea
|
|
Man that looks really sharp.
Ok, now I'm really tempted. When I buy a set of black headlights from you, do you include all the bulbs/ballast/etc or do I need to swap my existing ones over? I feel like my JSB headlights would be worth more if they included all the items to make them plug and play. Also, do you take the old ones in as cores or are you not interested in the painting process? |
Originally Posted by Justinjor
(Post 1580081599)
Man that looks really sharp.
Ok, now I'm really tempted. When I buy a set of black headlights from you, do you include all the bulbs/ballast/etc or do I need to swap my existing ones over? I feel like my JSB headlights would be worth more if they included all the items to make them plug and play. Also, do you take the old ones in as cores or are you not interested in the painting process? I usually only buy damaged lens lights and pay up to 200.00 set so you would definately get more for them here or on eBay. |
I can also just do your lights. Comes out to about 800. with paint and new lens.
|
The ones you sell for 1080, are those OEM black? Or have they been painted?
|
Originally Posted by Justinjor
(Post 1580081687)
The ones you sell for 1080, are those OEM black? Or have they been painted?
My painter, who is one of the best and oldest running Corvette oriented shops around, uses the 2 stage process and OEM paint code to paint these. There are literally hundreds out there over the past 4 years with absolutely no problems reported. You can do a search on black headlights. A lot of the threads will concern my customers that have the black painted headlights and ask them if they are happy. |
Oh I'm sure they would look fine, I was just curious, that's all.
I'm torn on adding more power to the car, or working on the visuals right now so when I decide that, I'll be sure to let you know. Thanks for the info |
Bump
|
Originally Posted by RLSebring
(Post 1580146878)
Bump
|
All times are GMT -4. The time now is 01:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands