Originally Posted by Marc@Vettenuts.net
(Post 1584267497)
We have some nice ones in stock however they are expensive to ship. Where are you located?
I have a LS1 short block with all Lunati rotating assembly. Fully forged and ready to go for $1950. Pics below. Thats all other than the 99 LS1 coming in w/122k. We have been selling motors as fast as we can get as of the last month or so. |
Air pump availability?
Can you.post a picture of the air pump, if still available? Looking for my 98? Asking how much if a match ?
|
Probably a dumb question but looking for EBCM code "V" for my 1999.
|
Originally Posted by GradyBaby16
(Post 1597720849)
Have a c5 driver side rear brake hard line? From rear driver side caliper hose to abs module?on a 98 Vette, rear mount abs. How far are you from ATL, GA?
Originally Posted by Clyde63
(Post 1597722715)
I’m trying to find the window drip rails for my 03 Z06 also the left inside door panel black in color. Would you have them ? Gaty
Originally Posted by BURL
(Post 1597733135)
I'm just above Knoxville ad would like to come do a pickup of the Lunati bottom end LS1 if its not sold. Do you know the mileage?
Originally Posted by Jonnysugar
(Post 1597734792)
Can you.post a picture of the air pump, if still available? Looking for my 98? Asking how much if a match ?
Originally Posted by Vette Dreemz
(Post 1597735735)
Probably a dumb question but looking for EBCM code "V" for my 1999.
|
Pm sent!! |
I also sent you a PM but would you have these nut clips for the radio bezel? They go behind the cigarette door. I need a couple of them if you have them please. The PM for some reason wouldn't let me attach a picture of what I'm looking for, that's why I'm using this thread. I work the night shift so I'll check back later this afternoon when I wake up. Thanks.
https://cimg0.ibsrv.net/gimg/www.cor...9ce0d326d1.jpg |
Front bumper filler
Originally Posted by Marc@Vettenuts.net
(Post 1584265817)
02/22/2018
We just parted out 3 C5 Coupes this week. Two were extremely low mile with excellent parts so let us know what you need because we have it. Please email me for the best response rate. Marc marc@vettenuts.net 615-896-6100 https://cimg2.ibsrv.net/gimg/www.cor...d9ed7969cb.jpg https://cimg6.ibsrv.net/gimg/www.cor...3e39d3c9b.jpeg https://cimg8.ibsrv.net/gimg/www.cor...82b1ba6b4.jpeg https://cimg1.ibsrv.net/gimg/www.cor...2215273aea.jpg https://cimg2.ibsrv.net/gimg/www.cor...fbea8d3a9b.jpg https://cimg3.ibsrv.net/gimg/www.cor...9ea00bde4b.jpg https://cimg4.ibsrv.net/gimg/www.cor...03c351b9bb.jpg Thanks |
I'm interested in Front fenders for 2002 convertible, preferably quicksiler, I'd consider slightly damaged fenders too
|
I need a working/ tested keyless fob for a 2000?
|
also ABS assembly.
|
automatic transmission shift boot
automatic transmission shift boot?black or gray shipped to 46203.
|
I have a 04 Black Z06 and unfortunately Bambi and I got a little too comfortable with each other.
Do you have the following items and if so how much for each shipped to 58104 Pass Side Fender Front Bumper Cover - also would consider Tigershark Ft Bumper Pass Side Headlight Assembly - need everything associated with the headlight assembly - Bambi messed this part up good as it was at night :( Pass Side Headlamp Bezel 10435412 Rt Headlamp Bezel Clip 10282366 Rt Pass Side Headlamp assembly stud plate 10290322 Right Headlamp Door 10319955 Pass Side Corner Light 10301356 Rt Park & Side Lamp Bracket 10269680 Right Filler Front - 10333648 |
Sent you 2 pm's and have yet to hear anything from someone. I know they don't cost all that much but it would be nice to have them if possible, or let me know if you'd rather not mess with them.
|
Hello kind of taking a shot in the dark here. Would you or anyone else happen to have a passenger side Magnetic Red II Headlight cover for a C5? My car is a 2002 C5 Magnetic Red II Coupe. Would be ideal to be from 2001-2003 time frame as I believe the color changed between 2000-2001 on some models. My old one cracked and I'd love to put a new one on there. Thanks!
|
Payment sent, thanks.
|
Originally Posted by Marc@Vettenuts.net
(Post 1584265817)
02/22/2018
We just parted out 3 C5 Coupes this week. Two were extremely low mile with excellent parts so let us know what you need because we have it. Please email me for the best response rate. Marc marc@vettenuts.net 615-896-6100 https://cimg2.ibsrv.net/gimg/www.cor...d9ed7969cb.jpg https://cimg6.ibsrv.net/gimg/www.cor...3e39d3c9b.jpeg https://cimg8.ibsrv.net/gimg/www.cor...82b1ba6b4.jpeg https://cimg1.ibsrv.net/gimg/www.cor...2215273aea.jpg https://cimg2.ibsrv.net/gimg/www.cor...fbea8d3a9b.jpg https://cimg3.ibsrv.net/gimg/www.cor...9ea00bde4b.jpg https://cimg4.ibsrv.net/gimg/www.cor...03c351b9bb.jpg |
Looking for the Window/Door reveal molding for a C5 FRC or Z06 passengers side.
|
3rd pic blue vette with hood raised.. what year is it and will it fit a 2001 vert? Thank You, Dan
|
do you sell front accessories by themselves? I also need both motor mount brackets.
|
Keep reaching out but getting no replies..do you have any m model ebcm assemblies?
|
All times are GMT -4. The time now is 02:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands