Dyno results ( need help to post graph)

[0331MARINE]

Not to bad I dont guess. Still have some tweaking to do but its a start. RWTQ seems low to me, but for a cam and a few bolt on's Im happy!! 412.46RWHP/366.85RWTQ. 2001 MN6. If someone could post my graph ill email it to them. Thanks Guys. 84.89 Degrees,29.45in-HG, Humidity 48% Smoothing:5. Texas-Speed MS3 Dual Springs Hardened Push rods Long Tubes 3in exhaust no cats with Borla Stingers AFE Cold Air Intake Ported TB NGK Tr55's Tuned with EFI Live. Hoping to add a FAST Set-up and a new set of heads soon.

[j0n]

jmyzie at gmail dot com

also what cam and bolt-ons?

[0331MARINE]

jOn you have an E-mail.
Thanks

[j0n]

[sami85L98]

Good result. Add good flowing heads and watch ur dyno between 3k-4k rpm, for some reason MS3 cam produce less Torque thats what i observed few cars with MS3 cam. Either looks good man.

[simpleman68]

Originally Posted by sami85L98

Good result. Add good flowing heads (like the ones simpleman is selling) and watch ur dyno between 3k-4k rpm, for some reason MS3 cam produce less Torque thats what i observed few cars with MS3 cam. Either looks good man.

Fixt
Congrats on the new set-up. About what I made cam only with headers and stock 241s. My torque was 387 though, to address your torque concern.
Scott

[0331MARINE]

Originally Posted by sami85L98

Good result. Add good flowing heads and watch ur dyno between 3k-4k rpm, for some reason MS3 cam produce less Torque thats what i observed few cars with MS3 cam. Either looks good man.

I have seen the same, just dont understand why. Like I said there is still some little things that need to be done, I just want to do it all at once I get the heads and intake put on.