Apiasto

FS: Set of VMR V701 18x8.5 F 18x9.5 R with 2 front tires .. Rears are on but need to be replaced (camber wear) I can get pics as soon as I can get to my shed which is looking like July lol. The front tires have a good amount of tread left (my guess would be probably 2 more summers). Asking 875. No TPMS. Looking for local sale.

Most Recent Picture I have of the wheels on the car (they came off after this meet):



Wheel 1 Passenger's Side Rear:



Found what appears to be a rock chip:





Wheel 2 Driver's Side Rear:







Wheel 3 Driver's Side Front:









Wheel 4 Passenger's Side Front:









VMR Center Caps:



All 4:

1 BAD BURB

This look like a BMW forum?
Go put it in "other cars" section. Mods going to move it anyways.

Apiasto

I didn't realize there was an other cars section. I figured since the bolt pattern is the same and the bimmer's center bore is slightly larger these could be used on vettes (with centering rings). They could make for a nice set of beater wheels.

former50

Nice pic.... Ross's dock under the Palisade cliffs...correct?

Apiasto

YES SIR!! Awesome spot for pics especially under the bridge....

dev1360

BMW is 5x120mm. Vette is 5x120.65mm. While they will bolt on, they aren't right and will side load the stud. Besides that issue, the offsets are likely very wrong unless used with a pretty big spacer.

former50

I know it well. Grew up in Fort Lee, spent a lot of time there. Great spot.