New z06 Owner Looking for Several Mods
#1
Pro
Thread Starter
New z06 Owner Looking for Several Mods
Hi everyone, just wanted to introduce myself to some of the locals:
http://forums.corvetteforum.com/c5-g...z06-owner.html
Also, I'm looking for the following items for my 2003 z06:
- MGW Shifter (prefer the C6 handle model due to **** availability)
- LG 1 3/4" LT with cats
- Underdrive crank pulley
- CAI (Vararam)
Please PM me if you have any of these items. Thanks.
Luke
http://forums.corvetteforum.com/c5-g...z06-owner.html
Also, I'm looking for the following items for my 2003 z06:
- MGW Shifter (prefer the C6 handle model due to **** availability)
- LG 1 3/4" LT with cats
- Underdrive crank pulley
- CAI (Vararam)
Please PM me if you have any of these items. Thanks.
Luke
#2
Hi everyone, just wanted to introduce myself to some of the locals:
http://forums.corvetteforum.com/c5-g...z06-owner.html
Also, I'm looking for the following items for my 2003 z06:
- MGW Shifter (prefer the C6 handle model due to **** availability)
- LG 1 3/4" LT with cats
- Underdrive crank pulley
- CAI (Vararam)
Please PM me if you have any of these items. Thanks.
Luke
http://forums.corvetteforum.com/c5-g...z06-owner.html
Also, I'm looking for the following items for my 2003 z06:
- MGW Shifter (prefer the C6 handle model due to **** availability)
- LG 1 3/4" LT with cats
- Underdrive crank pulley
- CAI (Vararam)
Please PM me if you have any of these items. Thanks.
Luke
#5
Melting Slicks
Just a piece of advise, before you invest in an MGW shifter, test one out from a local Vette owner. There are a LOT of people that do not like them (me being one) because they are way too notchy.
#7
Melting Slicks
It's sold quite often in the for sale forums....there is a reason for that. Who knows, maybe the new MGW with the MGW lower box is vastly improved than the older shifter I had.
Last edited by tlove32; 03-06-2014 at 02:50 PM.
#8
Pro
Thread Starter
Thanks guys, although I definitely have heard mixed opinions, MGW still probably has more positive than any other shifter. From my understanding there were at least 3 generations of this shifter?
In any case, I'd like to give it a shot along with the anti-venom mod.
Luke
In any case, I'd like to give it a shot along with the anti-venom mod.
Luke
#9
Safety Car
I thought the MGW was very notchy, I'd get a C6 shifter instead.
Also if your looking for a tuner after those mods there's a very good local that myself and others use from your area
Also if your looking for a tuner after those mods there's a very good local that myself and others use from your area
#10
Pro
Thread Starter
#13
Pro
Thread Starter
Also wondering if there's anyone on the Peninsula (San Mateo, Burlingame/Palo Alto) area that knows Vettes and can install a shifter and exhaust system.
Of course any shop can do it, but I am looking for a shop with attention to details who has Vette experience.
Thanks,
Luke
Of course any shop can do it, but I am looking for a shop with attention to details who has Vette experience.
Thanks,
Luke
#14
Melting Slicks
The shifter is very easy. You can use this link as a guide:
http://www.c5forum.com/diy/hurstdiy.php
As for the exhaust (I'm assuming headers) - take it to Rick@Synergy. You'll need a tune after install
http://www.c5forum.com/diy/hurstdiy.php
As for the exhaust (I'm assuming headers) - take it to Rick@Synergy. You'll need a tune after install
#16
Safety Car
#19
Instructor
Member Since: Oct 2006
Location: San Jose CA
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts