Any guys in MA interested in a Kwik Lift?
#1
Le Mans Master
Thread Starter
Any guys in MA interested in a Kwik Lift?
Long story.
I'll give you the short version. I got it (locally) from an EBay auction this winter. I used it(UP) only twice. I have the chance to pick up a 4 post lift, cheap, and am going to jump on it.
I have the lift(Red), one center bridge, the small ramps for the front of it(when it's in the down position), and ran 4" no-skid tape up both side of the ramps. It's in excellent condition, and works perfectly.
These, as you know, sell for $1300. I paid $700.
I'll sell the entire setup for $600. It's in MA - I'm willing to travel about 10+/- miles to meet someone if interested. It's a deal at $600
I'll give you the short version. I got it (locally) from an EBay auction this winter. I used it(UP) only twice. I have the chance to pick up a 4 post lift, cheap, and am going to jump on it.
I have the lift(Red), one center bridge, the small ramps for the front of it(when it's in the down position), and ran 4" no-skid tape up both side of the ramps. It's in excellent condition, and works perfectly.
These, as you know, sell for $1300. I paid $700.
I'll sell the entire setup for $600. It's in MA - I'm willing to travel about 10+/- miles to meet someone if interested. It's a deal at $600
#3
Racer
Great Deal
This is a great deal for someone and worth the drive with a pickup truck to get it.
I use mine all the time, my C5 is parked on it always and in the up position too. Great for keeping the C5 clean.
Hi JB, c5 firstimer from Methuen. Selling it already JB ??. If I know of someone, I'll let you know but bet I don't have much time.
C5firstimer
I use mine all the time, my C5 is parked on it always and in the up position too. Great for keeping the C5 clean.
Hi JB, c5 firstimer from Methuen. Selling it already JB ??. If I know of someone, I'll let you know but bet I don't have much time.
C5firstimer
#6
Le Mans Master
Thread Starter
C5Firstimer- Yep, it's sudden, but the other deal came up, and I can't justify having both.
Admiral - I can ship it to you freight collect via a local carrier that I use - It'd probably run you about $90 to NJ, but that's just a guess. It's be a MAJOR PITA to get it to a "safe" shipping condition, but it could be done.
Burton - you can use a manual floor jack - You slip it under the heavy tubular bar up front, and up it goes. I have the instructions somewhere, but they can also be found on Kwiklift.com . I DO have an air jack that I bought from Kwiklift. I paid around $350 for it - I have used it only to test it. I'd sell it for $300, but that's about all I could do on that.
Admiral - I can ship it to you freight collect via a local carrier that I use - It'd probably run you about $90 to NJ, but that's just a guess. It's be a MAJOR PITA to get it to a "safe" shipping condition, but it could be done.
Burton - you can use a manual floor jack - You slip it under the heavy tubular bar up front, and up it goes. I have the instructions somewhere, but they can also be found on Kwiklift.com . I DO have an air jack that I bought from Kwiklift. I paid around $350 for it - I have used it only to test it. I'd sell it for $300, but that's about all I could do on that.
#9
Melting Slicks
meeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
sell it to meeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee e
#11
Tech Contributor
Is this sold?
#13
Tech Contributor
thanks, you'll like that lift. If you make up blocks you can support the front or rear suspensions.
Gary
Gary
#14
Drifting
Member Since: Jun 2005
Location: Middleboro Massachusetts
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 82-Guy
Sent you a PM - I'm local and work in N. Quincy at State Street. You have a sale if it's still available.
Guy
Guy
We have to stop meeting like this.
Todd G.