Hey I sent you a private can you go check it out

I just recently swapped to full coilovers from Van Steel, but for 84s I think it's recommended to stick with the leafs as the shock towers aren't meant to support the weight of the car. The wheels I got from OEwheelsllc.com down in Sarasota, FL (short drive for me). 17x11, 315/35/17 on all four corners. For an 84, you'll need adapters for the back, just not sure how big they need to be, but OEwheels may have them with the correct backspacing. Most guys just run a 17x8.5 with 255/45/17 and 17x9.5 with 285/40/17's. You can also run 17x9.5s on all fours so you can rotate your tires. Thanks for the compliments.

For any suspension mods, I've got to recommend VanSteel.com (800-418-5397). If you call, Paul or Dan are great to deal with!

Hi eric, can you tell me what your suspension mods and wheels sizes are? My fathers friend made me a offer on a 84 vette i just cant turn down... but to me i thought they were the ugliest vette's made until i seen yours
thanks
Pete

Hi. I saw a response that you had for somebody that had a heater problem. I was wondering if you could help me? I saw the picture you took of your engine, with something that had some wire attached to it and some bolts holding it down. It's circled in red. I'm not real mechanical, but I'd like to give it a shot and see if I can fix my problem. Do I remove that part that you have circled? Is there anything underneath that I need to be careful of when I mess with it that I can't see? I would appreciate any help you can give me. Thanks. Gary

Hi !
You expressed interest in our laptop skins and I wanted to let you know that they are now available. I posted that however the threads disapear so fast that I am wondering if all of you even saw it.
Just thought I would let you know
here's a link to our store http://www.motorheadbanners.com/store.php
Thanx for your interest...Gary