what is the name of your shop and where are you located. I would love to stop in!

Don

Paul

Were you the mechanic working for Tom at Corvette Specialty Center in Walden? If so I met you many times on my trips there to purchase parts for my yellow 68 Convt. and 60. You built my windshield for the 60. I remember You, Rick, Tom and Mark. Sad it all came to an abrupt end with the deaths of Mark and Tom.

Don Izzo

RE: Thanks Ray whats up with your painter ? we did at least 5 cars since your was started

Pauly my friend, you need to understand, my painter is an artist .... and a lunatic.

Got all of the shiny bits back, it looks great. I wish my painter had the same enthusiasm.

Hello
I got your name actually from here on the Corvette forum and was told you may be able to help me.... I have a 65 C2 I'm modifying and was originally inquiring on the forum about rim and tire sizes I could use. I'd like to use 8 inch wide rims in the front (using 245's) and 9.5 or 10 inch in the rear (using 275's) and was intending on flaring the fenders for clearance. I'm waffling between 16 and 17 inch diameter rims; and would like to avoid having to alter anything underneath the car other than the fenders. I've been told there are aftermarket flared fenders for the car adn also told there are entire bodies I could purchase with the mods already done so I wouldnt have to butcher mine.... Any information and advice you could provide would be appreciated! by the way if its easier my number is 314-713-0920
thanks very much
Bill

hello, if you really interested in the 1980 vette yellow 4speed we could work out something out so i could ship it out to you.