When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sorry for the auto fill Mark. Will do on the paint supplier.I have a pretty competent guy at car quest that I can ask, might get a second opinion from NAPA. Any thread on stripping would be sand, sand, and more sand. You know how it is.
Regards
Charles
Hey Charles. My name is Mark... I used an epoxy primer on my bumpers, and an unmodified acrylic enamel topcoat. It has small cracking already so I recommend you talk to your paint supplier and see if a flex additive is needed in your prime coats. I used epoxy primer for the first time on my car so I lack the experience to tell you better. I have done quite well reselling those parts you kindly provided, I have been gathering new parts as they sell. With the advent of Daylight Savings there should be more rapid progress since I cannot currently work on the thing past dusk. I will tell Dale you said hello, and how about a thread on your stripping adventures???