Vacuum Gauge Install

Air Fuel Gauge Install

Cutting Front Coils - Lowering

Windshield Washer Update

Qucikjack Wheel Mod, removed by mods

Body Mount #4 removal tool

Digital PRNDL

Hydroboost

Parking Camera and Mirror LCD

seat-belt-conversion

Pedal trim

hood-clean-up

Vac-Hose Sleeves

Parking Brake Handle - https://www.corvetteforum.com/forums...-finished.html

Kick Panels Custom mod - https://www.corvetteforum.com/forums...erior-mod.html

Deluxe Door Panels and Custom inserts - https://www.corvetteforum.com/forums...-for-once.html

Shift knob - https://www.corvetteforum.com/forums...-finished.html

Control Arm shaft vs bushing sizes

Upper shaft .670-.676, moog bushings .683-.687, prothane .685-.689
Lower shaft .738-.742, moog bushings .755-.758, Prothane .754-.758

MOOG K6035 (2x) (ball joint lower)
MOOG K6034 (2x) (ball joint upper)
MOOG K5196 (2x) (control arm upper)
MOOG K304 (1x) (arm lower, does both sides)
MOOG ES323L (2x) (tie rod inner)
MOOG ES323R (2x) (tie rod outer)
MOOG K6100 (1x) (Idler arm)

Wheel bearings
19768 SKF - TIMKEN 9406S Wheel Seal
TIMKEN SET5 Wheel Bearing
TIMKEN SET3 Wheel Bearing

Rotor shim compensations

Shim on a stud - Shim on the next 2 studs
.010 .0038
.006 .0023
.005 .0019
.003 .0011

Shim on/between 2 studs - Shim on the next 2 studs
.010 .0062
.006 .0037
.005 .0031
.003 .0019

Q-Jet gasket set w/hot slot Felpro 60043 (bottom), Felpro 60731 shim, Mr.Gasket 4256G
Q-Jet power pump - NAPA 2-4055 (dark blue rubber diaphragm)
Q-Jet Float NAPA/ECHLIN 2-440
Q-Jet Filter WIX 33051 (NAPA 3051 or 23051)
Q-Jet Filter Gasket Hygrade R20-154, pk of 10, later style seals inside the carb


Points - NAPA/ECHLIN CS786P
Condenser - NAPA/ECHLIN RR175
Cap - RR165
Rotor - RR169R
Steel Dist Gear GM 10456413 (for roller cams)

PVC - AC DELCO CV736C
Oil Filter - WIX 51061
fuel pump - Carter M6104

Crank WP Belt 15315, 11A0800 Dayco TopCog
P/S Belt 15435, 11A1105 Dayco TopCog
Alt Belt 15320, 11A0815 Dayco TopCog (was using a 15310 but too close to the valve cover)

Front Wheel Bearings, Timken Set3 and Set5 (per side)
Front wheel Seal, Timken 9406S

1/2 Shaft U-Joints Spicer 5-799X
Drive shaft U-Joints Spicer 5-790X

3:08 gear with 235-70 tires (measured at just over 28" tall)
Speedometer gearing 43 driven gear with an 18 drive gear perfect to the gps at 55mph

Rag-joint ground - Ground-path-to-rag-joint

CS144 bracket and wiring - cs144-conversion-and-wiring-upgrades-72-bb

Spreader Bar and Brackets - http://forums.corvetteforum.com/c3-g...-for-a-bb.html

Automatic Shifter Clean-up - auto-shifter-cleanup

Heater Control Assembly - heater-control-clean-up-and-assembly

exhaust band clamps - http://forums.corvetteforum.com/c3-g...er-hanger.html

Installing rear sway bar bracket on TA - http://forums.corvetteforum.com/c3-g...bar-bolts.html

parking brake mechanism install - http://forums.corvetteforum.com/c3-g...e-install.html

Fire Extinguisher Mount - https://www.corvetteforum.com/forums...-finished.html

Power Window Switches - https://www.corvetteforum.com/forums...-finished.html

Front Cross member dent removal - http://forums.corvetteforum.com/c3-g...mber-dent.html

Headlamp actuator seals - http://forums.corvetteforum.com/c3-g...new-seals.html

Wiper door actuator boot mod - http://forums.corvetteforum.com/c3-g...ator-boot.html

Speakers and Amp - http://forums.corvetteforum.com/c3-g...p-install.html

Rear Glass - https://www.corvetteforum.com/forums...placement.html

Rear Glass replacement - http://forums.corvetteforum.com/c3-g...-urethane.html

Rear Camber adjustment - http://forums.corvetteforum.com/c3-g...ne-method.html

Headlight assemblies - http://forums.corvetteforum.com/c3-g...s-forward.html

Trailing Arms/strut rods/half shaft install - http://forums.corvetteforum.com/c3-g...long-post.html

Rear Sway bar bushing install - http://forums.corvetteforum.com/c3-g...tallation.html

Wiper motor assembly - http://forums.corvetteforum.com/c3-g...-assembly.html

Idle Stop solenoid - https://www.corvetteforum.com/forums...r-problem.html

Control arm bushings - http://forums.corvetteforum.com/c3-g...g-removal.html