Hi, my name is Tony Boniello. I recently launched a car meet (Cars & Coffee style) that meets once per month in Bergen County, NJ and wanted to extend the invitation to you. There’s never any pressure to attend a specific meet, but if there’s a date that we set that you can attend, we’d love to have you. We will likely resume meets in late February or March.

If you want to drop me your e-mail address, I will add you to my e-mail list and you’ll get updates as to when and where we’ll be holding future meets, charities we work with, etc.
I hope you can join us!

Thanks,
Tony
(also, feel free to e-mail me at carsandcoffeeNJ@yahoo.com for additional info)

You are using way too much Zaino.

1 oz of Z-2 or Z-5 will do a Corvette 3 times including the rims... Less is best..

Sometimes Zaino users always tend to apply way too much Z-2
or Z-5.... This is very common problem and will dramatically increase
the
drying time of Zaino... Even when using ZFX. All Zaino products are
exremely concentrated and must be used sparingly.. Remember Less is
Better... :-).



Humidity and low temperatures also are killer on the drying time of Z-2
or
Z-5. The moisture in
the air hinders drying time up to four times longer than normal. Sorry
but I can't help this. The smears you are seeing was the Z-2 that you
didn't remove. When you try to remove Z-2 when it is still wet. All
you're accomplishing is moving it around. Kinda like reapplying it.
Also you need to use a LARGE Bath size towel to remove Z-2. Smaller
towels will not work efficiently. I hope you weren't using a small
towel????


To test if Z-2 is dry and ready to be removed. Wipe your finger on a
hazed section of Z-2. It should immediately come off and leave a crytal
clear finish. If it smears it is still wet. You can leave Z-2 on for
hours or overnight if you desire. When it is not humid Z-2 will take
anywhere from 30 to 60 minutes to dry. Depending on how heavy you
applied it. I have applied Z-2 in the Arizona sun and it dried in about
3 minutes. I have also applied it in 38 degree temperature and it took
about
2 to 3 hours to dry.
Be patient. It's worth it.

Different situations affect drying times.

Z-2, Z-5 does not contain any oils and once it's dry will never ever
look smeary or feel greasy.

To get rid of any smears. Just wipe down the car with a damp towel. Or
better yet just wash the car
using Z-7. This will remove any smears. Don't use Z-6 until you wipe the
car
down. If
you'd like call me and I'll help you out with more info!

Hope this helps.

Are you still interested in the console pieces.?

I have a nav unit, if your interested

Nice ride.