Well, you could buy mine and start having fun!! LOL

I’d suggest figuring out your accessory drives and induction system next. You’ll need to know these things for hood and cross member clearance, like described in my ad, I had to bump the L88 hood another 2.5 inches to clear the air cleaner and I used a drop base with a 2 inch element. You’ll also need to consider the fuel system. I’m running a mechanical GM Performance pump with a regulator because I just didn’t want to go electric. I was after a “period” factory looking install though I did have to run 1/2 inch fuel line to feed that thing. Hope this helps!

I have a line on a 454 for my 1981. TKO-600, Iron rear end with 3.55s, custom shafts already installed. Whats my next move...other than remove the 81 boat anchor.

Block 3999289
Heads: 336781
Intake: 336789
Crank: 353039

I want to do to my 80 corvette crossmember what you did to yours. I've seen your pics but I need more specifications, measurements you could give me that would help. Can you help me ?