autoxer6 autoxer6 is offline

Racer

About Me

  • About autoxer6
    Name
    Chris Shay
    Location
    Milwaukee WI
    Occupation
    Mechanical Engineer
    Year & Model
    '04 Z06
    Color
    Black
    Mods
    Koni's, 32mm front bar, Harness
    Biography
    Solo Nationals - Super Stock:
    2011 Finished 3rd, 0.001 out of 2nd. Was 1st after day one.
    2010 Finished 7th. 2nd after day 1.
    2009 Drowned in the puddle.
    2008 Finished 4th. Highest placing Corvette.
  • Signature
    Chris Shay '04 Z06

Statistics

Total Posts
Albums
Visitor Messages
Total Likes
General Information
  • Last Activity: 02-08-2022 12:27 PM
  • Member Since: 04-06-2008

Friends

Showing Friends 1 to 3 of 3

Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. autoxer6
    05-10-2010 08:51 PM
    CaptW,
    Camber is a bit odd. 1.75 in the rear is a lot. Try 1 - 1.3 in the back. And 2 - 2.3 in the front. Pressure is good.

    Many people like a 32mm front bar. Rear toe changes the balance of the car under power.

    The main thing is to be smooth with the throttle!

    Good luck
  2. CaptWSims
    05-09-2010 11:07 PM
    I've recently switched from Street Modified to a 2001 Z06 that I'm going to run in SS. Have done just 1 event in the Z, and was disappointed...my SM car would have been faster. Car had a street alignment, and the new A6s were getting alot of shoulder wear. Now I'm at 1.5 neg fronts, 1.75 neg rear, with 0 toe front, 1/16 inch rear toe-in. Will find out Sunday whether that's enough camber...thinking I'll be adding some more in front.

    A6s are 295s in front, 315s in rear. What tire pressures would you run? I was planning on starting at 35 psi front, 30 psi rear.

    Wanting to learn this car and its setup as fast as possible...willl be running at Blytheville at end of month, and only have 1 event between now and then!

All times are GMT -4. The time now is 02:39 AM.