Hi you might be the man to help me with some advice I have a 2007 c6 in Victory Red with an AVIC HD3 BT [by coincidence] I have just had that fitted Excellent!
I have the lowering Bolts sent from the States to the UK and tonight after work I did the drivers rear popped in the bolt onto a bed of LM2 Grease and wound it in fully and backed off one full turn as a starting point. All went well on Reassembly apart from the Lower Ball joint....it is just turning the ball in it's housing....I can't get a Torq in as it's bang under the Drive shaft.....as you can on the Toe Link and the other Link.....I tried putting a second jack under the Joint to put some weight on it but it is still just turning....whats the answer to that? If mine looks like yours I'll be well chuffed....Cheers! Ken