Hello Porchdog,

Im in Fort Worth and just purchased a 69 black Ttop. I saw you are down around Stephenville. Can you tell me a little about your process, and cost? thanks, Roger

just no interested in pissing matches with children and part timers. it is sad so much bad info gets passed around here. i had the owner of spi come to the site only to be ran off by kid with 5 years experience and a moderator.

Porchdog. thank you very much for your info on my hood. Sorry to hear that you are not posting anymore, you are such a great source of knowledge, take care, Al

shine, picked up a gallon of ditzler 330 today to try and get that striiper completly off, and found on the gallon can in red letters DO NOT USE ON FIBERGLASS,STATIC CHARGE MAY CAUSE FIRE!!, SHIT did i get the wrong stuff??...........thanks steve

did not know these were here.
yes i use only spi. i use only epoxy, no other primer.
i use acrylic and corn cob to blast with.

Hello Porchdog,
After reading quite a few of your posts it sounds like you're a big fan of SPI Epoxy Products. I'm a few months away from starting the priming/painting process on my '63 Corvette.(Conv.) I'd like to go with a lacquer topcoat (Ermine White) but I'm not sure which undercoats to use. How does this order of succession sound to you? #1. SPI Epoxy primer. #2.Slick Sand #3. Sealer (SPI Epoxy Primer?)#4. Lacquer topcoat. (Possibly/Probably PPG). I have painted several Corvettes w/ lacquer, MANY years ago.
I'd appreciate any help/tips that you might be able to pass along. Thank you!
Regards, Bob Lovgren, Waukegan, IL.

what do you blast with? I have a little 30 pound sand blaster and thought i would blast my doors surfaces.

what do you blast with? I have a little 30 pound sand blaster and thought i would blast my doors surfaces.