When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I recently purchased one of your short throw shifters for my C6 and there is a noticeable rattle at higher RPMs. I went through some threads and it seems like there are several other members that have had a similar issue. Please let me know if there is a solution for this.
Hey guys looking to buy these headers for my c6 z06. A couple questions. How does the ceramic coating hold? I was reading up and last year there was a person who's headers started peeling off right away, and it the 02 sensors issue taken care off? Last question is, is there a sale going on for forum members currently?
Placed an order on Sunday 11/9 for wires and heat boots with free plugs, you charged my credit card on 11/9 too and then I have heard nothing from you? I emailed the support email address that sent me a copy of my order today but again no response. Please advise as to the status of my order as soon as possible. Thank you
Im about 70 miles from Bham and looking to get a set of your engine mounts (and trans mounts if you have come out with them) for a C6 Z06. I also am looking for 160 lb/hr high impedance injectors to work with stock computer. Do you have any of these? Id like to come pick everything up within the next week to week and a half if possible.
I have an 04 C5 California registerd car. Is this intake CARB legal. I've already had to change out my air filter this year. Would not want to install this to find out I'd have to swap it every smog year.
What kind of deal can you cut me on some Trickflow heads (open for suggestions on which ones either as cast or I think 225's) and a centerforce dual friction clutch with an aluminum flywheel?
Thanks,
Matt