John Micheal Henry 
Drifting
Last Activity: 07-19-2022 12:39 PM
- About John Micheal Henry
- Name
- John M. Henry
- Location
- Marshall Texas
- Occupation
- GM (Hourly) Retired
- Year & Model
- 2014 C7/Z51/M7
- Color
- LRG
- Mods
- Phase 1-MGW Shifter. ARH with cats and 1 7/8" primaries w/NPP. aFe CAI and tune. Now saving for phase II. :)
Phase ll : A&A V3-Ti with meth injection and a 3.8 pulley..Started install 2-28-2018.. :)
Done.. 674rwhp.. - Country of Residence
- US
-
Signature
- 2Fast4U 04/A4 Mods,K&n Fresh Air,LG Pro Long Tubes,Raydon Cats,Borla Stinger Dual Tips,3.42 Diff.,Ported&polished TB,G5X1 Cam,AFR 205/59cc Chambers,U/D pulleys,LS2 Timing Chain,LS1 Edit,Dyno, 511 HP @ FLYWHEEL,426RWHP.Z06 Anti-Sway Bars F&R,06 Z06 Shocks F&R.
P.I.2800 Converter
- 2Fast4U 04/A4 Mods,K&n Fresh Air,LG Pro Long Tubes,Raydon Cats,Borla Stinger Dual Tips,3.42 Diff.,Ported&polished TB,G5X1 Cam,AFR 205/59cc Chambers,U/D pulleys,LS2 Timing Chain,LS1 Edit,Dyno, 511 HP @ FLYWHEEL,426RWHP.Z06 Anti-Sway Bars F&R,06 Z06 Shocks F&R.
Showing Friends 1 to 3 of 3
-
-
- robert miller
- Team Owner
-
- RottenII
- Racer
Showing Visitor Messages 1 to 4 of 4
-
-
-
I never changed to the Z06 grille because I think the larger openings just allow more road debris to get through to the radiator, and I don't mind the chrome trim of the stock Stingray grille. I do know that you have to be careful not to break off the tab that holds the corner of the bumper next to the headlights or it will not go back on right. I think I have seen a photo somewhere, but basically there is a tab that fits into a bracket to hold down that small section next to the headlights. Even if it does not break, some have had problems getting the bumper to lay down flush when re-installed. see the 6 minute mark of this video.Good luck.
Here is a photo of the bracket with the clips that hold the bumper cover next to the headlights. Looks like you need to carefully pull straight up.
-
Showing 3 of 3 Friend(s)
The last 10 visitor(s) to this page were: