Recieved my AFR's today !!!
#1
Le Mans Master
Thread Starter
Recieved my AFR's today !!!
Fedex came with a package today :) , I snapped a few shots before dropping them off to the engine builder ;) . He hasn't seen to many of these heads & his 1st impression was that they look like nice heads for the money. We're going to flow them to see how they look there too ;) .
So without further ado:
Here's the intake port: (not a very good pic)
The exhaust port:
What it's going to look like with the intake on top:
And for the heck of it, a birds eye view:
So without further ado:
Here's the intake port: (not a very good pic)
The exhaust port:
What it's going to look like with the intake on top:
And for the heck of it, a birds eye view:
#3
Le Mans Master
Thread Starter
Re: Recieved my AFR's today !!! (ld85)
Thanks ld85, I don't have the exact date in front of me, but I think it was 8 weeks since I placed the order with Flatlanders Racing :)
#6
Race Director
Re: Recieved my AFR's today !!! (SmokedTires)
I went with the 210cc Race Readys :)
Glad you have yours though,,,, :hurray:
#7
Safety Car
Re: Recieved my AFR's today !!! (SmokedTires)
That stuff looks fabulous!
Are those titanium retainers? What kind of spring pressure are you running? Roller or shaft rockers? Can't wait to see the finished product!
Are those titanium retainers? What kind of spring pressure are you running? Roller or shaft rockers? Can't wait to see the finished product!
#8
Le Mans Master
Thread Starter
Re: Recieved my AFR's today !!! (ld85)
ld85, that seems like a long time for bare heads, I would call them to see if they could maybe get them to you a bit sooner ;) .
FLareside yes I upgraded to titanium retainers :yesnod: . I'm not sure about the spring pressures, but I went with Pacaloy springs and +.100 valves. My cam is a solid roller :D .
FLareside yes I upgraded to titanium retainers :yesnod: . I'm not sure about the spring pressures, but I went with Pacaloy springs and +.100 valves. My cam is a solid roller :D .
#9
Race Director
Re: Recieved my AFR's today !!! (SmokedTires)
ld85, that seems like a long time for bare heads, I would call them to see if they could maybe get them to you a bit sooner ;) .
FLareside yes I upgraded to titanium retainers :yesnod: . I'm not sure about the spring pressures, but I went with Pacaloy springs and +.100 valves. My cam is a solid roller :D .
FLareside yes I upgraded to titanium retainers :yesnod: . I'm not sure about the spring pressures, but I went with Pacaloy springs and +.100 valves. My cam is a solid roller :D .
#10
Melting Slicks
Re: Recieved my AFR's today !!! (SmokedTires)
I'm interested in your flow numbers too!
Seems we got the same heads within couple of months of each other.
Nice induction system too!
:)
Seems we got the same heads within couple of months of each other.
Nice induction system too!
:)
#11
Burning Brakes
Re: Recieved my AFR's today !!! (SmokedTires)
Hey Smoked tires, look's like x-mas came a little early, interested like wise in the flow numbers, awesome looking set up. TOo bad winter last so long up there.
#12
Le Mans Master
Thread Starter
Re: Recieved my AFR's today !!! (Beach Dude)
Thanks guys :D Yeah Christmas did in deed come a tad early this year :D . I'm not sure when the heads will be flowed, but I will post the numbers once they're in ;) .
:cheers:
:cheers:
#13
Re: Recieved my AFR's today !!! (SmokedTires)
I went with the 210cc Race Readys
#14
Le Mans Master
Thread Starter
Re: Recieved my AFR's today !!! (arnold)
I went with the 210cc Race Readys
Obviously, the 'race ready' heads are hand ported. I trust they were ported at AFR? Did they by chance, give you any specs as to port volume AFTER the porting?
Obviously, the 'race ready' heads are hand ported. I trust they were ported at AFR? Did they by chance, give you any specs as to port volume AFTER the porting?
#15
Race Director
Re: Recieved my AFR's today !!! (SmokedTires)
Its a miracle,,,,,,,,,,,,,,, my bare AFR-210 RR heads came in today,
AFR forgot to drill the sensor holes but at least I got them!
They will be assembled by http://www.indyheads.com and in my hands in a week. Indy Heads will drill the holes for me too and cut them to 68CC
Overall the delivery turned out to be 4 1/2 weeks which is not too bad! :party:
AFR forgot to drill the sensor holes but at least I got them!
They will be assembled by http://www.indyheads.com and in my hands in a week. Indy Heads will drill the holes for me too and cut them to 68CC
Overall the delivery turned out to be 4 1/2 weeks which is not too bad! :party:
#16
Le Mans Master
Thread Starter
Re: Recieved my AFR's today !!! (ld85)
Wow, that's awesome ld85, looks like an early Christmas present for you too :D