Sb Engine Combinations

[Corvettelvr73]

Any one know a good website that lists a few engine combos and the HP TQ that they [produce? I remember one that had at least 50 Combos but I cant find it.

[Cris]

Is this what you were looking for:

http://www.ryanscarpage.50megs.com/combos1.html

[Corvettelvr73]

that is exactely the site i have been looking for.

Thanks alot

[Race Prepared]

Originally Posted by Cris

Is this what you were looking for:

http://www.ryanscarpage.50megs.com/combos1.html

Nice bit of info - which engine combo are you looking at?

[Corvettelvr73]

Im not real sure right now but I think I want a stout 350 at least 350HP maybe 400HP. Something that I will be happy with for a while since I am not very concerned about having a race motor or a 383 because I want a nice fun weekend car when I finish the body off resto. IF you have any opinions on a nice 350-355 combo with a great all around cam that sounds mean but is very streetable let me know. Thanks I am going to start on a engine soon and then save up for a richmond 6 speed I guess.

[1chromebumper]

Just finished having my engine built,

Here is what we installed:

Carb: Edlebrock Performer Carb
Camshaft: ISKY 264 mega cam p/n 201/264
Intake: Weiand Action Plus p/n WND-8120
Heads: Dart Pro 1 heads alum angle plus 215cc p/n WND-8120
Crank: Scat Cast 2pc rear, 3.480 in
Rods: GM Hi Perf 5.7L PM LT1
Pistons: GM Hypereutectic
Headers: Blackjack by Dynomax for Vettes
Exhaust: 2 1/2 alum
Muffler: Stock exit from Flowmaster 40's
Distributor: speedcity motors HEI vette tach drive
Coil in Cap: 50000 v
Main and Rod: Clevite 77 bearings
Oil Pump: Milling
Rings: Speed Pro Moly
Fuel Pump: Holley
Lifters: Crane
Push Rods: Blue Racer
Timing Chain Cloyes double roller
Damper: Harmonic 6 1/4 internal balanced
gaskets: Fel Pro
stamped rocker roller tips


Not sure what kind of numbers..... our goal was 400 torque and 400 hp at the flywheel, any guesses?
now breaking in around the 150 mile mark

[cuisinartvette]

A good cyl. head in the 180cc range, cam around 220-230 @.050 duration (Isky 270 or 280 cam, Edelbrock RPM will give you a strong reliable runing street motor with power everywhere. 1-5/8 headers, 650 cfm carb.

[KyleDallas]

Here's a list of combo's off of AFR's site... all with AFR heads. Lots of good 450-550hp
combos.

http://www.airflowresearch.com/articles.php#SBC