Any gone 11's with with 3.07s
#1
Any gone 11's with with 3.07s
Just wondering if anyone has gone 11s with 3.07 gears and 350 cubic inches naturally aspirated?
Last edited by Tached; 07-28-2014 at 11:22 PM.
#2
Burning Brakes
12.18 @109 on pep boys radials, not drag radials. that's as close as I could come with my pump gas std. bore 350 with ported 89 L98 heads and small ft. hyd. cam in my 82 vette with 3.36 gears. could have gone quicker if I could leave full throttle. traction is hard to come by on street tires.
went 12.41 with the original 2.87 gears.
went 12.41 with the original 2.87 gears.
#3
12.18 @109 on pep boys radials, not drag radials. that's as close as I could come with my pump gas std. bore 350 with ported 89 L98 heads and small ft. hyd. cam in my 82 vette with 3.36 gears. could have gone quicker if I could leave full throttle. traction is hard to come by on street tires.
went 12.41 with the original 2.87 gears.
went 12.41 with the original 2.87 gears.
#4
Drifting
I recently went 11.95@116 with 3:00 gears and 29" tall tires.
I have a 406 though\th400-never even got out of 2nd gear. hehe
I am installing 3:89's in the next week or so....
I have a 406 though\th400-never even got out of 2nd gear. hehe
I am installing 3:89's in the next week or so....
#5
#6
Drifting
On that run no I don't have the slip but I do have the one that I made on my street tires. I eased it out of the gate but the 60' is very similar his one was a 1.79 as opposed to 1.74 with the 29" drag radials.
This pass was on a 28" street radial.
This pass was on a 28" street radial.
#7
Drifting
Car # 7107 on the right