The month sale (Everyday new product will come and go)
12-02-2013, 01:07 PM
#1
Former Vendor
Thread Starter
The month long sale (Every day new product will come and go)
Ladies and Gentleman,
This is a new concept for us to run a sale that last until New Years. Every day there will be a new item listed on this thread. But they will only be on sale for two days. There will be a expiration date listed on each listing. Here is the link to the sale items.
http://dougrippie.com/category/end-of-the-year-sale/
We can be reached at 336-350-8256 for any questions.
So lets get this thing started!!!
Randy
This is a new concept for us to run a sale that last until New Years. Every day there will be a new item listed on this thread. But they will only be on sale for two days. There will be a expiration date listed on each listing. Here is the link to the sale items.
http://dougrippie.com/category/end-of-the-year-sale/
We can be reached at 336-350-8256 for any questions.
So lets get this thing started!!!
Randy
Last edited by Randy@DRM; 12-05-2013 at 06:49 PM.
12-02-2013, 01:12 PM
#2
Former Vendor
Thread Starter
DRM Stainless steel pistons have been a great product. Not only in sales but in application also. Price drop from 139.95 to 109.95 with 1/2 off shipping. Sale ends 12-4 at midnight.
http://dougrippie.com/products/drm-s...steel-pistons/
The factory aluminum pistons are a huge heat sink, rapidly transmitting heat from the pads into the fluid. DRM’s stainless steel pistons insulate the fluid resulting in a more consistent brake pedal and less chance of fluid boil. When high performance or racing pads are used these pistons are considered a must.
These Stainless Steel Pistons will fit C5 base, Z51, Z06 and also C6 base, Z51
http://dougrippie.com/products/drm-s...steel-pistons/
The factory aluminum pistons are a huge heat sink, rapidly transmitting heat from the pads into the fluid. DRM’s stainless steel pistons insulate the fluid resulting in a more consistent brake pedal and less chance of fluid boil. When high performance or racing pads are used these pistons are considered a must.
These Stainless Steel Pistons will fit C5 base, Z51, Z06 and also C6 base, Z51
Last edited by Randy@DRM; 12-02-2013 at 01:25 PM.
12-02-2013, 01:21 PM
#3
Drifting
subscribed 
12-03-2013, 12:30 AM
#11
Melting Slicks
Have that kit, but in on the thread
12-03-2013, 12:21 PM
#13
Former Vendor
Thread Starter
Day two. Free shipping would just make it better so you never have to think about if you are still getting a good deal on multiple purchases
15 percent off and free shipping all wheel spacers!!!!!!!!!!!!!!!!
http://dougrippie.com/featured/drm-wheel-spacers/
When wheel spacers are needed, none are better than DRM spacers. Machined from 6061T561 billet aluminum. This material was selected to ensure accurate torque of the wheel against the spacer, and it will stay there. They fit and center perfectly on Corvette hubs because of precise machining tolerances. The spacers are turned on a lathe within .0005 of parallel to ensure a prefect run-out of the tire. All sharp edges have been deburred for a nicer, stronger product. The spacers are black anodized for a long lasting finish. Spacers thicker than 3/8” feature an integral hub for the wheel to center onto. Made in the USA!!! By the same company since 1988
The price listed is for 2 spacers. If you need 4, please make sure to buy 2 axle sets.
This sale will end on 12-5 at midnight.
15 percent off and free shipping all wheel spacers!!!!!!!!!!!!!!!!
http://dougrippie.com/featured/drm-wheel-spacers/
When wheel spacers are needed, none are better than DRM spacers. Machined from 6061T561 billet aluminum. This material was selected to ensure accurate torque of the wheel against the spacer, and it will stay there. They fit and center perfectly on Corvette hubs because of precise machining tolerances. The spacers are turned on a lathe within .0005 of parallel to ensure a prefect run-out of the tire. All sharp edges have been deburred for a nicer, stronger product. The spacers are black anodized for a long lasting finish. Spacers thicker than 3/8” feature an integral hub for the wheel to center onto. Made in the USA!!! By the same company since 1988
The price listed is for 2 spacers. If you need 4, please make sure to buy 2 axle sets.
This sale will end on 12-5 at midnight.
12-03-2013, 03:03 PM
#17
Drifting
12-03-2013, 03:42 PM
#19
Burning Brakes
This is AWESOME! Couldn't have been more perfect for me than to start off with the brake calipers. I like the sounds of studs too.
Thanks for kicking back some dough for the set I bought just before the sale!
Can't wait to get your radiator in.
Good deal Randy! 
Thanks for kicking back some dough for the set I bought just before the sale!
Can't wait to get your radiator in.
Good deal Randy!
