davidfarmer

haven't posted in a while, they get muddled up over time on my Facebook page. However, you can always find them by going to my Facebook page, and scrolling down (and scrolling and scrolling).

Print both side, laminate, keep in your car or tool box!

www.facebook.com/DavidFarmerRacing

https://drive.google.com/file/d/1DHs...?usp=sharingc5 trouble codes
https://drive.google.com/file/d/1AuH...?usp=sharingc5 Fuse Layout
https://drive.google.com/file/d/0Bx3...a-LuuxhGSEzK9Q c5 complete parts list
https://drive.google.com/file/d/1gdi...?usp=sharingC5 Torque Specs
https://drive.google.com/file/d/1GKN...?usp=sharingC6 Trouble Codes
https://drive.google.com/file/d/1fpP...?usp=sharingC6 Automatic Torque Specs
https://drive.google.com/file/d/17rb...?usp=sharingC6 Manual Torque Specs
https://drive.google.com/file/d/1NLL...p=sharingC6Z06 Torque Specs

I have the alignment guide, Diff fitting guide, etc still available. If you can't find them via my Facebook page, let me know and I'll add them here.

DavidFarmerRacing@gmail.com

As always, I also have Vinyl Stickers and am available for Alignments, suspension installs/repair, corner balance, driver coaching etc in NC and the tracks that surround us!

PaConehead

I just used this site last week to check some C5 torque specs - thank you !!!

JDIllon

David!! Thanks again for posting this info!! For those of you that do your own work on the car!! this is great info to have and use. JD

YYZ06

Good stuff David. I'm a Facebook conscientious objector so if you wouldn't mind linking them that would be great. This'll go in my racing links file.

fcarga

Ditto to all of the above posts and thank you for taking the time!

davidfarmer

I'll try and post the rest of the links later. I hope you aren't a "Dropbox" objector?????

TheKomoman

Thanks David - I object to neither Dropbox nor Facebook (though I'll admit that one makes me wince) so I grabbed them. Thanks as always!

Scooter70

Joe,
I saved all of Dave's documents to my phone so I always have them with me at the track. Junior is all over Facebook so you could have him look for you though.

YYZ06

Never heard of it... Honestly, I'm no Luddite... I'm sure Matt will educate me.

Thanks Matt. I'll have to look into Drop box. I saw you sent me an invite.

davidfarmer

https://dl.dropbox.com/u/1634366/accusump.pdf accusump fitting for LS engine
https://dl.dropbox.com/u/1634366/align.pdf my basic alignment measurement guide
https://dl.dropbox.com/u/1634366/apr-wheel-stud.pdf APR Studs info
https://dl.dropbox.com/u/1634366/camberplate.PDF camberplate info, just basic FYI
https://dl.dropbox.com/u/1634366/diff.pdf diff fitting info for coolers
https://dl.dropbox.com/u/1634366/FluidairParker.pdf great Parker fitting catalogue info
https://dl.dropbox.com/u/1634366/quartermaster-C5.pdf Quartermast clutch install info
https://dl.dropbox.com/u/1634366/SuspensionGuide.pdf basic chassis setup guide-quick reference
https://dl.dropbox.com/u/1634366/T-5...ice_Manual.pdf T56 repair manual
https://dl.dropbox.com/u/1634366/weatherhead.pdf Weatherhead brake fittings 1-NAPA
https://dl.dropbox.com/u/1634366/weatherhead2.pdf Weatherhead brake fittings 2-NAPA

davidfarmer

gtw, Dropbox is great for 1. sharing files 2.syncing files 3.backing up files (depending on storage needs).

Carbonite is cheaper if you need to back of lots of data (I have 400gig on Carbonite, movies, music, docs, etc), but Dropbox is awesome for files I use daily!

Scooter70

If anyone wants a Dropbox account, click this link: http://db.tt/yArBZzU

el es tu

David does some great work with vinyl:



the mustache may look easy to cut, but no way would I have attempted to make that monocle!

shakedown067

We need to create some facebook tabs for that there page!

davidfarmer

If I've missed anything, let me know. I'm in the north Charlotte area, so if anyone needs anything, please let me know. My kids are getting older, and I'm ready to start turning more wrenches!!!!!

DavidFarmerRacing@gmail.com

Z06Tracker

David is a great supporter of the Corvette community, and can help you with many of your Corvette needs.

DansBlkonBlkZ06

David,
Good to know you have more time this year. I'll need a tech and alignment done next month. I'll need some numbers and TT3 stickers too. The vinyl work you did on Morris' car is awesome. I'm also thinking about the Pfadt Stage 1 JOC suspension upgrade and want to get your thoughts on that. Thanks

crimlwC6

Thanks! I need vinyl..pm you or what?

JETninja

Thanks David!

davidfarmer

Dan the JOC setup sounds like a great for the money, although coil overs would ultimately be a better option (I think you are talking about the shock/bar package).

just email me for any other needs DavidFarmerRacing@gmail.com