C6 Z06 stock caliper rubbing C5 Z06 wheel
#1
Melting Slicks
Thread Starter
C6 Z06 stock caliper rubbing C5 Z06 wheel
I have been running this combo for a couple of years now and I know the clearance is very tight.
I recently replaced the stock calipers with new stock calipers and noticed when I got back from Sebring this week that I had very slight rubbing between the spokes and the caliper.
So I'm wondering if anyone has seen this rubbing with good bearings.
It must be either the new calipers are a few thousands thicker or my bearings are starting to wear.
I recently replaced the stock calipers with new stock calipers and noticed when I got back from Sebring this week that I had very slight rubbing between the spokes and the caliper.
So I'm wondering if anyone has seen this rubbing with good bearings.
It must be either the new calipers are a few thousands thicker or my bearings are starting to wear.