F/S C6 Z06 OEM track wheels/tires
#1
Pro
Thread Starter
Member Since: Apr 2001
Location: Arizona by way of Ohio,USA
Posts: 686
Received 45 Likes
on
30 Posts
F/S C6 Z06 OEM track wheels/tires
Track Wheels/tires, OEM GM polished C6 Z06 with many marks from tire changes and one large rim lip scratch. Two 18” and two 19” wheels, 4 wheel sensors, four Kuhmo V710s 305/30/18 & 335/30/19. Tires have 8 autocross events on them.
Price $1200 plus actual shipping, continental US only.
Mike
More photos:http://forums.corvetteforum.com/album.php?albumid=11225
Last edited by ReddyZ06; 05-10-2010 at 01:47 PM.
#6
Racer
this makes me a sad panda. are you doing a stock rebuild on the 442 or are you going to install sweetness along the lines of what i'm building with the camaro?
#7
Safety Car
Can you post some pictures of the tire wear. I am trying to gauge how much life they have left. Also, How many runs do you have on them?
Last edited by Charley Hoyt; 05-12-2010 at 02:39 PM.
#8
Pro
Thread Starter
Member Since: Apr 2001
Location: Arizona by way of Ohio,USA
Posts: 686
Received 45 Likes
on
30 Posts
Charley,
Track Wheels/tires, OEM GM polished C6 Z06 with many marks from tire changes and one large rim lip scratch. Two 18” and two 19” wheels, 4 wheel sensors, four Kuhmo V710s 305/30/18 & 335/30/19. Tires have 8 autocross events on them - probably 40 runs of 45 seconds or so.
Mounted/Spin Balanced
Price $1200 plus actual shipping, continental US only.
More photos:http://forums.corvetteforum.com/album.php?albumid=11225
Thanks,
Mike
Last edited by ReddyZ06; 05-12-2010 at 03:06 PM. Reason: balanced
#9
Pro
Thread Starter
Member Since: Apr 2001
Location: Arizona by way of Ohio,USA
Posts: 686
Received 45 Likes
on
30 Posts
Sorry, I missed your post yesterday.
Yea, doesn't make me very happy either. The 442 will be nothing like your project. Just a small tuned-port motor '72 disc brakes, California body. I have a bolt-in roll bar from a C5 Z06 ... I need to see how close that comes to fitting in the '64
Mike