Help. What wheel is this?
02-20-2010, 05:22 PM
#1
Instructor
Thread Starter
Help. What wheel is this?
I bought an extra set of track wheels. They are all 18 x10.5. Three of them are Speedlines from an 03 Z06.
The last one looks and feels the same, but does not say Speedline.
Stamped on the inside of the spokes are the following:
GM
F-12-13-00
USA RG G158
9593805
011102
The weight appears to be the same but the spokes appear to be SLIGHTLY thinner.
Any experts out there? Is it an Alcoa? Any knowledgeable opinions would be appreciated.
Cheers,
CV
The last one looks and feels the same, but does not say Speedline.
Stamped on the inside of the spokes are the following:
GM
F-12-13-00
USA RG G158
9593805
011102
The weight appears to be the same but the spokes appear to be SLIGHTLY thinner.
Any experts out there? Is it an Alcoa? Any knowledgeable opinions would be appreciated.
Cheers,
CV
02-20-2010, 05:50 PM
#2
Burning Brakes
CV...
Here's a photo of an Alcoa wheel. Alcoa's are not spunned aluminum like the Speedlines and weigh 1/2 to a pound more per wheel.
Here's a photo of an Alcoa wheel. Alcoa's are not spunned aluminum like the Speedlines and weigh 1/2 to a pound more per wheel.
Last edited by 96solo; 02-21-2010 at 03:35 PM.
02-21-2010, 02:56 PM
#3
Instructor
Thread Starter
Bingo!
That's the one. Thanks Darrell.
I am going to send two of the 4 wheels to Weldcraft to be Widened to 12". I think I'll use the Alcoa and one of the Speedlines as rears on my car and run the matching Speedlines on the front.
Cheers,
CV
I am going to send two of the 4 wheels to Weldcraft to be Widened to 12". I think I'll use the Alcoa and one of the Speedlines as rears on my car and run the matching Speedlines on the front. Cheers,
CV
02-21-2010, 03:33 PM
#4
Burning Brakes
I've been looking at replacing my bent Classic CCW's.