[NEW RELEASE] ForgeLine New Three Piece Wheel [NEW RELEASE]
#1
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
[NEW RELEASE] ForgeLine New Three Piece Wheel [NEW RELEASE]
Hi guys!
-----FOR IMMEDIATE RELEASE-----
New from ForgeLine and LG Motorsports comes a new and exciting three piece design, the EV3R. Designed around the very popular ZX3R line of wheels that have been used on our own race cars here at LG Motorsports but designed to further remove weight.
This new wide split five spoke follows the trend as you have seen on the new 2009 Z06 'Spider wheels' making for a very nice spare set of track wheels!
As with all ForgeLine wheels you get any number of custom finishes and combination of colors to make them your own. Shown below are two new such exciting color layouts.
EV3R Black and Polished
EV3R Titanium Finish
Currently the new EV Series will only be offered in 18" diameters.
Why should I buy ForgeLine you ask?
The ForgeLine wheel centers are produced using a 6000 ton hydraulic press. The press forges the wheel center into a general shape before it is CNC machined to create the final design.
Forging aligns the grain structure, reduces porosity, and increases uniformity in the material, thereby increasing the strength to weight ratio with consistent results. This process also allows the use of 6061 aluminum which can be heat treated to be 40% stronger than cast aluminum.
Experience, dedication, and personal involvement of LG Motorsports and ForgeLine make sure you receive the best quality, strength, and finish in the industry.
CALL FOR DETAILS AND PRICING!!
-----FOR IMMEDIATE RELEASE-----
New from ForgeLine and LG Motorsports comes a new and exciting three piece design, the EV3R. Designed around the very popular ZX3R line of wheels that have been used on our own race cars here at LG Motorsports but designed to further remove weight.
This new wide split five spoke follows the trend as you have seen on the new 2009 Z06 'Spider wheels' making for a very nice spare set of track wheels!
As with all ForgeLine wheels you get any number of custom finishes and combination of colors to make them your own. Shown below are two new such exciting color layouts.
EV3R Black and Polished
EV3R Titanium Finish
Currently the new EV Series will only be offered in 18" diameters.
Why should I buy ForgeLine you ask?
The ForgeLine wheel centers are produced using a 6000 ton hydraulic press. The press forges the wheel center into a general shape before it is CNC machined to create the final design.
Forging aligns the grain structure, reduces porosity, and increases uniformity in the material, thereby increasing the strength to weight ratio with consistent results. This process also allows the use of 6061 aluminum which can be heat treated to be 40% stronger than cast aluminum.
Experience, dedication, and personal involvement of LG Motorsports and ForgeLine make sure you receive the best quality, strength, and finish in the industry.
CALL FOR DETAILS AND PRICING!!
#4
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
You are looking at the first 'production car' wheels made. At this time only a few sets for the GXP.R teams have been made and tested at Daytona. We have a couple sets on order so I should be able to say for sure within a few weeks.
Right now I believe they are shooting for 17-18 lbs each for a 18x10 and 19 lbs for the 18x13, but again I will not have exact weights until they arrive.
Right now I believe they are shooting for 17-18 lbs each for a 18x10 and 19 lbs for the 18x13, but again I will not have exact weights until they arrive.