Pressure in steering pump
#1
Pro
Thread Starter
Member Since: Dec 1999
Location: Venetia,Pa,USA
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
Pressure in steering pump
I also posted this in the C4 section. I just replaced the steering rack and before I connect the hoses I was wondering the absolute maximum pressure in the system. Stock hoses are a pain to connect and was thinking about making custom hoses. This car is raced in NASA ST2.
Thanks for any and all information.
Thanks for any and all information.
#2
Melting Slicks
Member Since: Sep 2004
Location: Southeastern Pennsylvania
Posts: 2,533
Likes: 0
Received 0 Likes
on
0 Posts
I also posted this in the C4 section. I just replaced the steering rack and before I connect the hoses I was wondering the absolute maximum pressure in the system. Stock hoses are a pain to connect and was thinking about making custom hoses. This car is raced in NASA ST2.
Thanks for any and all information.
Thanks for any and all information.
Frank Gonzalez
#3
Le Mans Master
Aeroquip offers hose and fittings suitable for high pressure
applications such as the power steering hydraulic lines.
Have a llook at the application guidelines for Aeroquip's
Some fittings that might be useful
.
applications such as the power steering hydraulic lines.
Have a llook at the application guidelines for Aeroquip's
- AQP High Pressure Hose. Blue fabric outer layer.
FCG0606: -06 x 6ft (longer lengths available) - Teflon Racing Hose. Braided stainless outer layer.
FCC0603: -06 x 3ft (longer lengths available)
Some fittings that might be useful
Steel Metric Conversion Adapters (Saginaw P/S)
FCM2608: -06 to M16 x 1.5
FCM2609: -06 to M18 x 1.5
Steel Inverted Flares
FCM2693: -06 to 1/2-20
FCM2694: -06 to 5/8-18
FCM2695: -06 to 11/16-18
Do not use aluminum (or brass) fittings for high pressure service.FCM2608: -06 to M16 x 1.5
FCM2609: -06 to M18 x 1.5
Steel Inverted Flares
FCM2693: -06 to 1/2-20
FCM2694: -06 to 5/8-18
FCM2695: -06 to 11/16-18
.