- What 1/4 can I run with this set up
- Couple passes at Island and learned how to launch this thing
- new dyno numbers
- kooks or american racing headers
- just back from dyno
- C5 Front rotors and calipers on rear?
- New Dyno Videos Vinci XXX Cam
- Vince Cam XXX Got dynoed 222/228/115
- texas speed and performace question
- 99 FRC w/ GHL + Tune only Dyno
- First pass on spray in the Z
- 1/4 mile ET Estimate, please...
- Dyno #'s with the Honker and ARH's.
- Clutch Recommendations
- Good news/bad news
- VIDEO - 2:73 (stock tune) vs. 3:73 (cammed)
- Official C5 1/4 Times List
- 243 heads on a coupe, worth it?
- forged Ls2 402 dyno
- Need advice on Mickey tompson tires
- New best in the vette
- Estimate RWHP and ET
- Hitting atco tonight...wish me luck
- Results after ARH and VR-B2.
- got the bug...
- Low hp numbers with good E.T.
- New best 60ft and ET
- Interested in buying your A4 C5 that runs consistents 10s?
- Raced a 640RWHP 350Z TT and '08 ZO6 *on closed course* today
- Dyno numbers from this friday.
- Her are my dyno numbers
- Dyno Results
- Dyno this friday what kind of numbers?
- dyno today
- Wanna guess what 11.0x time I'll run tonight?
- Congrats to RobZ on the new Record
- can't wait! LT + catless X install soon!
- How close to 10s you A4 C5s running 346, N/A, h/c, converter and gears?
- new pb bolt on c5z
- Another New Best(346) H/C -n/a- stock bottom end
- 12.7 stock !
- nitto 555r 2s
- Best run yet
- Dynoed my car today
- with these mods can i see 11.99
- Estimated 1/4 time
- WTF! 11.04@125.06mph new best MPH's though:(
- Dyno results in...mild H/C/I setup
- My dyno numbers
- will this tire combo work
- TSP PRC Terminator heads and LG G5x3 Combo! Worked LOL!
- anybody run 28" slicks?
- First time out with the 99 A4
- Bad 60ft times
- First Drag Race!!!
- 1998 How to launch
- Norris Motorsports 2003 Z06 Cam Only & Bolt Ons - 432 RWHP - Guess The Cam :-)
- Recient Upgrades to My 02 C5
- Worth it?
- First ever trip to the track
- New performance numbers
- No 10's for me sorry everyone :(
- got a transbrake or launch controller? where do you...
- Front runner tires
- What is the HP potential with H/C combo?
- 2.5 PRC 5.3 heads, MS3, etc....
- my 0-60mph times
- passes on mt et
- got a CCW drag pack? how do you...
- MT ET street radials
- Base line dyno 02 Coupe, 114,179 miles
- Baseline dyno numbers on my '03 Z06
- Best Way To Launch A Stalled A4 ??
- CDNPERF STAGE 2.5, 45rwhp Cam Only!!!!!
- THoughts on H/C Choice
- THoughts on H/C Choice
- worthy power increase?
- 70 RWHP gains from AFR's and E-test cam!!!!!
- how much rwhp?
- Any track results for people using the Trick Flow 215's
- RPM Cam only Procharged Z06
- After header dyno
- Witch cam makes more power? Vindicator/G5x4 LG Cam
- 13.0@108 vararam + catback untuned
- will a different intake help performance
- Estimated 1/4 mile times for an almost stock 2003 AE, 6 spd with a Blackwing
- Motive Gear 3.73 gear problems? (pics)
- dyno day tomorrow, any quess's??
- AnyBody Tried the XX LG Motorsports Cam
- New Supporting Vendor - Carbon Fiber Hydrographic Finishing
- New cam and tune
- crane 1.8 roller rockers
- What do you think
- another C5 cold -air intake question
- Dyno'd my 99 C5 - 326rwhp & 332rwtq
- Will 295-45-17 MT Drag Radials fit without rubbing?
- Whos got the fastest C5 M6????
- Installation of Xpipe
- RPM C6 Z06 Bolted to FLT 4L60E = SPECTACULAR!
- looking for the guys who really throwdown
- Launch technique for A4
- First time ever at the drag strip - how'd I do?
- First time at Atco tonight, decent results
- ECS Novi 2000 results
- roys 427 lg big 3in dyno #s
- Roys 427 with LG Big 3" Intial dyno
- hp gain after these mods?
- Novi 2000 Track Results
- Woodburn Raceway
- Whats my estimated rwhp and whats the next step?
- Jr Vet Run At Cc Drag Strip
- Exclusive photo's of the new home of The Vette Doctors...nice digs for sure
- my o4 zo6 running@ moroso
- 753.3 Ftlb Tq & 607.3 Rwhp
- MAF question
- Better 1/8 mile showing for my '99 FRC
- 2000 performance rear end advantages?
- Bracket racing consistency
- Torque Converter question.
- 2003 Z06 Intake/Exhaust/Tune Results!
- Me Vs Pullied 03 Cobra and buddies GTP
- Daily driving Drag Radials
- Another Cartek Racing NA heads and cam car in the 10s!
- cam/head rwhp #s
- cam/head rwhp #s
- 12.640 @ 111.47 Stock Frc
- Modded C5 vs 05 GTO LS2 ???
- CCW with 28" ET tires
- Track rental tomorrow March 12th @ Atco…
- 8.136 @ 88.39(1/8 mi) Tune/Drag radial only
- Vindicator cam...
- what a difference between the ls1 intake and ls6 intake!!
- Need some advice.
- Ran the 1/8th last Sat.
- 2008 Dragstrip predictions, lets here'em
- Do headers increase HP on an almost no performance mod car?
- Are 11's possible ???
- Norris Motorsports "Small" Cam Results
- The best cam 4 an automatic
- Dyno results for my TSP 228R cam
- Dyno'd my '01 Z06 - stock w/intake 352.7rwhp
- englanggreen whiplash dyno
- 1st Test and Tune
- My Z06 race Video
- Test & Tune today
- Need to out run my brothers car
- Dyno sheet 03 Z06 cam and headers
- Got a retune!!!!
- Dynoed my '01 Vette at School Today
- school me on mods - cams, intake, time involved, cost, power, new to ls1's
- C5 Z06 383 490/445rw. Where is my TQ?
- Finally got the FRC to the dragstrip
- Cam or Spray???
- TEA heads
- What can my vette have???
- Whats you 1/8 and 1/4 mph!
- 1/4 mile results 01 z06
- 1/4 mile time improvement going from 2.73 to 3.42?
- 3.15 to 3.42 gear change
- *****************Cartek Heads and Cam Special**********
- More track time
- Video MTI G1 on Stock heads, intake, exhaust
- Question regarding fuel delivery
- Stock C5 with 100 Shot Results!!!
- Expected Results??
- Wheel hop with new tires
- New track times 03 Z
- Track time estimates
- Power Results
- Which tires this year? Hoosiers or ET streets Both Biasply
- Latest A&A S Trim results at the track
- FAST intake results?
- best place for a tune and dyno?
- 228R Texas Speed Cam
- 12 Flat in a Stock C5 z06
- Comp Cam in from Rapid Motorsports!
- Is a ported throttle body worth any HP gains?
- best 1/4 mile times-C5,cold air,exhaust&nitrous
- et on a stock vette w/ 150 shot ?
- 50-150mph private track vid!
- FRC bolt ons new PB
- Dyno with 100mm
- 2003 Vert-Bolt-ons
- Heads / Cam / ported FAST 90/90 dyno numbers
- Broken diff questions
- BFG drag radials
- Cartek 3x cam?
- 03 ZO6 with HPE Mega Death cam (video)
- Options?
- C5 Dragracer Needs Help!
- Callaway Honker or Vararam
- AFR 205 heads = worth the $$$?
- C5Z vs R6
- ********** Cartek Line Lock Sale – January *************
- estimated rwhp?
- Gateway--Video by TAH81 12.25 w/bolt-ons
- Gateway video...
- Need an educated guess at my 1/4 times
- Z51/ZO6 Rear springs
- '99 FRC Dyno results, LT's, LS6 intake, halltech tric, z06 ti
- What brand rear gears?
- better runs on my FRC
- Any one ever use M&H slicks? 26x12x16
- FAST 90/90 and PTB
- Modded C5 vs C6
- 12's
- H/C/Juice Dyno Results
- ::590rwhp/493rwtq::
- New Spindle Ducts for better brake cooling?
- Blackwing vs K&N
- 10.35@132+!!!!!!!!!stock bottom end-6 speed!!!!!
- LT's Intake Predator vs Stock...
- Honest opinion about a 99 FRC E/T
- Dyno Results from my 01 Z06
- dyno 2000 vette
- High speed question...
- Dyno results 02 A4
- 10.51@129 MPH video
- Ended the season with a new best
- 10.30's @ 132+ C5 stock bottom end 346 N/A
- 10.49@129.38 NEW BEST.. details within..
- 410's and Dyno numbers
- race ready products cut-outs
- CARTEK built LS2 goes 10.61 @ 128.27
- New PB 11.24@123
- 99 FRC dyno Today
- 08 Race predictions
- 9 second N/A video
- 89.5mph???1/8
- Whats Happens When You Race A Mustang Against a Corvette
- Vararam
- gtech rr results
- TTi Stg X, 10 psi, pump gas goes 9.71
- what h/c combo to run 10's ina 02 zo6?
- Transmission question **help please**
- Corsa exhaust add more hp?
- HP/TQ in-car performance meter?
- Donaldson Blackwing on C5?
- 540 RWHP in a 02 Z = ?? 1/4 mile time?
- New best at the atco rental Nov. 30th!!!!!
- 416RWHP/428RWTQ on a Dynomite
- How much will MSD wires help?
- how fast will a stock or close to stock Z06 run?
- stock cubic inch Head/Cam Cars, How quick are you guys?
- What is the cost and upside/downside of 1.7/1.8 rocker arms?
- 11.02@126.64mph at Atco Saturday
- Yeah baby! 9s N/A
- Question for MN6 drivers
- New Best Time
- OK who has a 6spd H/C C5 here raise your hand!