- Finally Ready to Buy HEADS... cash in hand
- New Personal Best (just barely)
- Beers Time slips
- New 416 Dyno numbers. Thanks Ron and Pat G.
- What are the APS/TTi/STS TT guys running in the 1/4?
- Just Dynoed my 99 C5 : Intake/Full exhaust/Tuned
- LSX Shootout video
- quarter mile guesses?
- Went to the track...Whats you opinions?
- Dynoed my HCI Z06 today
- help with 1/8 mile time
- Rear Wheel Size HELP
- 2nd P L A C E !!!!
- managed new PB @richmonddragway
- FINALLY got once launch without a bog "new best everything"
- quarter mile on a dyno?
- 6 Speed drivers. Help me before I burn my car to the ground.
- 1/8th Mile Times are In!
- New best time! (FRC C5)
- Finally!!! 11's on Firestones Wide Ovals Woo Hoo!!
- Getting closer... 12.119
- New best time at the track today
- hmmm...
- First time out with cartek 427
- To TORCO or not to TORCO on the Dyno
- Stock motor 97 A4 w/bolt ons goes 12.19
- Opinions / estimates- LS1 power w/ these mods?
- New Best MPH
- video for two crazy runs
- Drag Tire Experts step in please
- need help with 410 gears
- full tank vs.1/2 tank
- Stock runflats at track?
- New Best
- Wheel Hop at track?
- What combo makes 500rwhp NA on a LS1/6 motor?? Possible?
- 11.948 @ 117.95 mph - Video/Slip
- Embarrased Myself at the Track
- EnglandGreen "Monster" Cam Install (2000 FRC)
- My 1st 1/4 mile time...input please!
- Incredible 11.94 Stock Run (Mark-44)
- Tire pressure with nitto DR
- Performance difference between Patriot and AFR 205s
- Numbers are in!
- video clips,10 seconds at a time !
- A little traction would be nice.
- First passes with blower, I am happy :)
- Got some dyno #'s with poor AFR, what do ya'll think?
- Stingers or SLP Powerflo
- Guess the Numbers!
- Dyno Results with Stock 2002 C5 with Borla Straight & X-pipes
- First Drag Times
- M6 guys... best 60' on stock clutch/gears?
- Does anyone have M/T 295x45x17s in stock??
- Tech Inspection at Englishtown
- Knocking on 11s with 336rwhp
- Been calling M/T on 295x45x17 DR! WTF!!!!
- Track results,carnage !
- First time out with the Z...new PB
- 60 foot time
- 10 sec club !!!
- "Barbie Vette" Goes 9.44 @ 148 New PB
- Dyno-tune after cam swap
- any new results with the LG big 3?
- etown t/t new best
- Great night at Gateway...
- Stock C5z VS D1sc Trans Am
- Anyone making over 550rwhp NA?
- 315 tires on 17x9 wheels fit ????
- Not doing good guys, think i'm done for the year!
- Pinks All Out at Gateway -- $20,000 to Winners
- Thoughts on a LS 3 427 stroker
- Naturally aspirated 539rwhp w/clutch slipping!!
- 469rwhp/432rwtq H/C Z
- ((((cartek stock cubes goes 9.4))))
- Noob question
- Why does my vette feel faster when cold?
- T1 Bars
- What are the BEST HEADS for a N/A 346?
- "Barbie Vette" does a 1.320 60' at the RPM Track Day!!!
- LSX Shootout, Memphis, Oct 9-12, 2008
- Blue's new owner..Maiden Voyage...10.80
- Bone Stock C5 Coupe = 8.704 1/8th
- Mustang dyno numbers
- C5 vs 1991 Acura NSX
- new PB with APS stock motor 10 psi
- Slight New Best still 1/8th mile
- First time at the track with my C5Z, MPH too low?
- First pass on the N20 in my Z06
- Do my Dyno #s look low?
- Rocker performance results?
- Anger Management 'heads up' racing
- Went to the track last night
- Second annual RPM Track Rental - Sept. 5
- H/C guesses
- Are these dyno numbers accurate?
- had a tune done today
- Cut .4 off your ET with these converters!
- Finally broke into the 6's in the 1/8 mile and I have VIDEO proof!
- Over 120mph accelleration?
- My 01 Coupe Dyno Run
- New C5Z owner, big thumbs up to Williamsperformance!
- 10.6@133 in car video
- 1/8 mile times with 100shot
- how much power
- ECS Paxton Goes 9.633 / 145 at 85% Throttle
- 106.5 MPH in the 1/8th
- Is is gonna break?
- Getting ready to buy 17x4.5 wheels how do they drive
- First ever passes in the Vette
- hoarsepower
- tsp package dyno results
- 17" ET Streets and the track
- Props to Intune
- Big thanks to Anger Mgmt. Racing
- Track day with run flats?
- Video of Run...no traction...shut down at top of 2nd
- WTB: Used (4) 17" Wheels need liteweight one's
- 403 L92 build w/ Ed Hutchings
- another 1.4 60 on motor
- The little 383 that could
- Tom Snitzers 2002 Z06 track car N/A dyno sheet
- Mods steps???
- Late Model Racecraft Feedback
- stalled A4 racers....
- Charley @ RPM = MAGIC
- RPM 4L60E Level 6 Trans F.S.
- livernois stage two head and cam package
- Rodney's C6/Z06 Rear End in the C5 "Barbie Vette" is HOLDING UP!
- Anyone add 243 heads to a 224 cam?
- Happy with times
- Suggest tire press and launch RPM
- Got the Z to the track for the first time
- Support Fartpipe.......
- 130 RWHP Gain with AFR/G5X3
- 2000 A4 Coupe all stock, what is average 0-60 time?
- Sickpuppy wheres those times at from Friday?
- Popped my cherry on Friday night!!!
- Header Question?
- new track times
- Anyone use Texas Speed & Performance
- 01 Z06 - First Modification?
- Stock FRC, 1/4 mile questions.
- what's your best 60' on all stock rear?
- Race Proven Motorsports 370Cu in D1SC Results!!
- Some more ported intakes and tuning results, FAST, LS7
- Baby cam + Tune in my Z06 - Results
- pix of sheet metal intakes plz
- Weight of 17x 9.5 Magnesium wheels
- 895 RWHP......402ci
- A4 & 150 shot
- Canadian Performance
- '03 Vette Automatic won't smoke tires
- first time out with new setup
- Just got the car back from Ed Hutchins... 402...
- air pressure
- New Numbers
- Race Proven Motorsports TFS 215 RPM-3 Cam
- 113k too late for mod's?
- F-1R + ECS Brackets & pulleys holds 18.5 lbs of boost with belt cut in half!!
- Cam opinions / by experienced owners or builders
- Dyno Results after Headers,X-Pipe, Borla Stingers.... Thoughts??
- Widest radial tire on 17x4.5 wheel
- C5 Screamer!
- What could I expect from Heads
- New Engine Numbers - Decent??
- c5 computer check engine light
- FLP "Barbie Vette" 802 RWHP with tires spinning!
- FRC dyno results
- Nitrous install, dyno & track results
- ~~~ St Jude Auction #48 Pfadt Coilovers C5/C6~~~~
- Update to H/C results...
- Ready to run with the big dogs.
- Horrible track debut for the 416.
- DYNO RESULTS with chart...tell me what you think!!
- dyno results
- Can I Get Into The High 11's? Or 400rwhp?
- Raced CBR600, GT500, LS1 T/A, and modified mustang GT.
- what high perfomance chips do you recomend for my 1998?
- Where can I find past weather data?
- what kind of H.P and times can I expect?
- First time at the track with the Z06 - *5400' DA*
- heads and cam improvement
- Finally got some dyno numbers for the 416.
- Has anyone run 28" drag radials on C5?
- First Timer
- **1/4 mile time**
- Friday night 1st time w/ C5 at Drag Strip 1/8th mile
- New Toyo TR1s now rear end 'floats' @ 80+ ???
- Joined 12 Sec Club. Can I make 11's with new mods?
- Some advice for my first run?
- Closest Track to Miami?
- 1/4 mile
- track times (Gainesville)
- Help me figure out whats wrong! Dyno LOW!
- New bolt-on bests at Atco
- kooks headers, second to none
- 12.56 1/4 mi. 122 mph.. about right ?/
- "Barbie Vette" just passed Ill. Emissions today!!!
- Pics of Bogart wheels on frt using 17"s
- What Air Bridge is best for Drag Racing??
- Damn-it Jim, It's Only a Launch
- Damn-it Jim, It's Only a Launch
- 99FRC NOS/bolt on's/tune results
- Need for Speed under 11.5 - Help!
- Anyone run BBK TB Vs Stock on Bolt on car?
- Best time for A4?
- C6 Z06 Rear End in a C5 / ECS Bracket Update!
- Is any of you running MT 295/45-17 Drag radials
- c5 1/8 times
- TSP torquer V2 and afr 205's
- Cam only FRC times
- Post C5 project by PHIL97SVT - Congrats Phil
- 3.15 Performance???? Need help ASAP.
- DynoPack vs DynoJet Dyno numbers
- HRPT Auto X
- new best
- C5 vs. LS2 C6
- Question - Wheels/Tires for Drag Racing
- CARTEK ***CHANGES and SPECIAL***
- On Behalf of American Racing Headers' staff...
- 442 LS7 550rwhd, how much more?
- temp affect track times???
- Avoiding wheel hop?
- Why don't we want corrected track times?
- Specter Sale - additional 10% off
- 362rwhp...track times
- Going to the strip in 2 weeks what to expect?
- 03 Z06 RPM-2 Cam 443rwhp
- Can any one in here answer this?
- Guess - PRC2.5+MS3+LTs
- 02 Z06 Dyno #'s on a Superflow Dyno??
- c5 rwhp stock?
- Mystery Mod? 327 RWHP Stock FRC?
- Term heads and G5X3 114 sound clip and 60 punch.
- Track Results (with Videos)
- My Track results(someone explain please)
- STD vs SAE Dyno Numbers - Explanation Please
- Great News In The Header Department
- Almost finished
- Be all end all best long tubes for 1/4 mile performance? (stock cubes)
- Any Guesses??!
- Dyno Results After Heads & Cam - Your Thoughts?
- Dyno Results - Advice Needed
- Video of 1/8 mile runs in my A&A SuperCharged 402 and mod details!
- Gained 32rwhp after the ported head swap
- Track results
- 1/4 time
- Meth dyno numbers
- What 1/4 can I run with this set up