2hotford

LOLOL Now why on earth did I know you were going to say that...LOLOLOLOL

Apparently you have not been on very many detailing sites over the years!

Once again, you provide nothing more than your opinion on the correct usage of a tool or your methodology for the use of said tool. Just because you surmise it is correct, alas does not make it so....and that is what I was trying to explain. You have your opinion, and that is fine; but it is not based on fact but rather opinion.

Tim

2hotford

I agree. But blindly suggesting that you are all knowledgeable in detailing which you clearly are not, is simply foolhardy. Like I said, I have not heard of you before...ever. So people that do "know" me from the industry can take that for what it is worth. My point is, until you provide factual proof of any of your assertions, they are meaningless. Sorry.

gmblack3

Dana, That is where you have it wrong. You and your mirror image are the ones who like to bring up tool misuse. If you could care less about the KBM then why did you yourself make up a name for your method? Remember Kevin did not call this method the KBM, Todd and I did. But you felt all insecure because nobody pays attention to you. So you tried to create a name for yourself and obviously failed. So now you feel the need to make a name for yourself by outright bashing with complete ignorance the KBM.

Tell me Dana why do you hope that PAC has a gathering oneday? Are you threating me? If you are be a man about it. Start with small steps and try to scare yourself when you look in the mirror.

In your PMs to me you where very upset that the 2 people over on AG that where giving you a hard time, had (in your words) less detailing experience then you. Like I said small steps and you too will oneday have that confidence to not worry about how others use tools to get the job done.

ASPHALT ROCKET

Tim, I never said I was all knowledgeable. Just because people's names are all over the forums do not mean anything. Plus your judgement of me really doesn't matter, last time I checked you put your pants on the sameway as I do and everyone else. It is funny some think they can go around acting like they have the most knowledge and that just isn't true. Just because I don't agree with something you or a certain group agrees with makes me less knowledgeable, not true, plus the lack of time on a forum doesn't mean anything either. Saying you have all these years of experience, anyone can claim that, doesn't mean they are any good, just might be average. I am sure you a very skilled detailer, I am as well, but that doesn't mean we have to agree on everything. What I am getting at is that these are all just words and pictures on here until people really meet in person you really can't judge , except by their detailing process you will pretty much know the end results. It doesn't matter to me how many people know you on the forums, it is what I feel you are like , not someone elses thoughts. Especially since there are so many little cliques on these forums. Just because someone thinks someone is that good doesn't mean someone has to agree. It is all about how that certain person feels about the other. Just like I was talking to someone on the phone last week there is probably someone that doesn't even bother with these forums that would school everyone on them so being on the forum no matter who you are really doesn't mean anything. A better judge of someone like I said would be on the phone but better yet in person. I not saying there isn't any good advice on the forums because most of the time there is, but like everything in life no one is going to agree on everything.

gmblack3

I find it very surprising Dana that you don't know who Tim is, but in turn I do not at all find it surprising that he does not know you.

ASPHALT ROCKET

Brian, the method thing was a joke and numerous people knew about it, because I knew it would get some of you are up arms we found it quite amusing. Looks at you, you are taking this way to hard. I don't agree with the tool usage so what. Not everyone is going to agree on things, maybe on how a certain polished is used, who cares. I don't have to agree with the tool usage and that is that. There was no bashing, I dis agree with the tool use again. Bryan if I felt insecure I wouldn't be on here, I am the total opposite, if people don't like my way of doing things so be it, but I have a bunch of people I have helped out and I am sure you have also so, so who cares.

There are no reason to take jabs Bryan, I posted how I felt about it and thats that. I am not threatening you. I simple hope that they have a gathering so I can meet some of you guys. I can bet none of us would act like we are on here in person. Why do you have to take the defensive stand? We would probably find out all this nonesense between everyone here is just that and would have a different tone on here or others forums after hanging out. So I don't know were this threatening thing came into play. If I wanted to threaten you I would have pm'd you. You need to relax man, your sarcasim and all. What are you so afraid of with this defensive type stand. Seems like you must have pissed off alot of people and and have to kepp looking behind your back with suggesting that.

I have plenty of confidence that in do time we will be hearing more about damage. I wouldn't think upset but if there wasn't the two pot stirrers in that htread all would have been fine and you would have not said what you said. In the end Kevin and I pm'd, exchanged numbers and that is that. I have no harsh feelings toward Kevin at all, just because I disagree doesn't mean I dis-like someone. You may have pissed me off with your little snide remarks but do I dis-like, no. I bet if I didn't disagree with the pc usuage all would be fine and we could tlak steelers and black corvettes. I just don't understand why you have to go as far as you do because I do not agree with something someone is doing. So what you don't agree, just keep doing what you are doing and so be it. I will do what I do and then we can talk about aother stuff and not have however many posts are on this thread taking shots at one another.

Bryan, I would go even as far as to invite you to go with me and my brother up to training camp on the week of the 17th. Just relax and take it as we don't agree on something.

bretfraz

I haven't heard of you either, and I've been on lots of detailing forums.

2hotford

LOLOLOL

Bret? Bret? I have heard of you before...somewhere....?????

bretfraz

I'm quite famous. Perhaps you've seen my videos. No, not THOSE videos!!

Here is one where I show the best way to clean your dashboard. Don't ya love my technique?

http://www.youtube.com/watch?v=6EvOv...eature=channel

Dave1

Did you use to live in Clarksburg.......?

gmblack3

If you look at the post I quoted above, you made the first sarcastic post and then the gloves where off after that.

Funny as in our past PMs I told you that you would be better off not worrying about how other polish paint. But you still have a problem with it as noted here. Nobody was talking about your method here or how you polish paint so why are you even in this thread?

Thanks for the invite, but I'd rather go to the Browns camp with my dad who is a Browns fan.

PS: I don't care for the Browns.

allstar14

The Browns, wow, never thought they would come up. Does your dad live in Ohio?

savewave

Keep the discussion civil or take it offline:

http://forums.corvetteforum.com/foru...rd-others.html

Don't off-link to non-supporting vendors:

http://forums.corvetteforum.com/foru...ate-links.html

Don't use Corvetteforum to market and promote products and services if you are not a supporting vendor:

http://forums.corvetteforum.com/foru...l-posting.html