On The Fence? Dry Your Car The Right Way - Don't Miss This Group Purchase (VID)..
04-14-2009, 08:00 AM
#1
Former Vendor
Thread Starter
Member Since: Sep 2008
Location: Brightwaters NY
Posts: 2,695
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09
On The Fence? Dry Your Car The Right Way - Don't Miss This Group Purchase (VID)..
So I have been selling the AirForce Master Blaster since July of 08 and the feedback had been great (read the full post below). To thank me the manufacture offered me a group buy and something extra.
I have been allotted 20 units at a group discount and will pass these savings right on to you. So $20 off (no order only) the already heavily discounted Master Blaster and an extra years warranty, which makes it a 2yr warranty (the warranty also applies to all prior purchases)
For the next 20 orders only $289 ($100 of retail)
Add the Metro Hand vac for only $66 (an additional $9 savings)
Order ORDER LINK And Other Car Care Vacuums
CLICK TO VIEW VIDEO
All orders past and future now get a free extended warranty - order from me and get 2yrs (normally 1yr)
IF YOU ARE A NON BELIEVER READ THE MEMBER REVIEWS BELOW. We have sold 300 at this crazy low price and have 300 very happy customers. I know many have and use leaf blowers / compressors now, drying your car with them is like, setting the wifes blow dryer to cool and see how good she drys her hair.
I guarantee this will make you believer or send it back for a refund.
Yes you can blow out the trapped water on your car with a compressor / leaf blower. You can not 100% dry your car with them, I have tried.
You cannot completely dry your rotors so they don’t rust with a compressor. The air that exits the masterblaster is not only 2-3 times the velocity of a leaf blower; it’s 5-6 times the volume of a compressor.
The big trick is the air temp is 60-80deg above ambient temp (so if you’re drying your car and its 60deg out the air out of the master blaster is 120-140deg). It's more about "DRYING" the surface and not just pushing the water off (a leaf blower or compressor can't "DRY" the surface).
Have you ever tried to wash a dry your car went it cold and damp out? Then you have an idea of just how hard it is to get a dry surface.
I don’t want to spill the beans yet but Jay Leno has the unit now (200 motorcycles and 600+ cars) maybe the greatest car guy around. I have already spoken with him and his Mike (manages this car/bike collection) they can’t believe they have lived without it. I will be featured on a “Jay’s Garage Video Spot” in the next few months.
Order LINK And Other Car Care Vacuums
CLICK TO VIEW VIDEO
Like with all the other products I make or resell, I bring you the Air Force Master Blaster at over $90 off retail because I believe it’s an effective, quality product that I put into a “best in class standard”. You may be very happy with your leaf blower, water blade, or absorber, but you should read on.
All professional detailers will agree any time you touch you paint finish you add micro scratches that eventually lead to a dull finish. Of all the finishing steps, drying offers the most opportunity to damage the finish. In addition we all know about the dreaded drips from the many locations like tail lights and mirrors.
Personally, for years I have been using a combination of cotton, micro fibers, compressed air and leaf blowers. Leaf bowers are great and I am sure many of you use them. The problem is, not only are you blasting your car with unfiltered air that can contain all types of debris, the nozzle is a hard plastic that can easily scratch your car. In addition it’s difficult to maneuver the leaf blower just where you need it, like in the door jams, cowl, wheel wells.
I came upon the Air Force Master Blaster via a friend that uses it to dry all his vehicles by blow-drying them dry with high velocity heated air. If you think this is a winner on the car, you need to see it work on any motorcycle, ATV or even the family pet (yes all dog groomers use these to blow dry the dogs). In fact you will find tons of uses for the master blaster. I like blowing the mats clean instead of banging them against the tree, it leaves them fluffy.
I love the company that makes these, 70 yr old family business located in NY and the product is made in the USA and often described as bullet proof.
As a special I am bringing you the Air Force Master Blaster for only $309. Over $90 off the retail price. Please note this is a very high power system and requires a 110v 20amp outlet (which most garages have)
"There are always discussions on here about using a leaf blower to dry you car, your motorcyle, whatever. I wanted something deigned for the job at hand and also a dryer with heated air. I had always seen the Air Force One brand in my Harley magazines, so I finally took a look and found the Master Blaster. This thing puts out over 58,000fpm of heated air. It is amazing!
Order LINK
Air is heated 60deg above ambient and all the attchements are rubber so they can't damage your car. NOW Comes with a 2 YEAR WARRANTY.
The AirForce Master Blaster Dryer features a total of 8 peak horsepower. Two twin fan, 4.0 Peak horsepower motors that deliver up to 58,500 feet per minute of clean, filtered, warm airflow. Two switches allow users to set the airflow and temperature at 3 different levels. Use either motor (front or rear) independently or both simultaneously for maximum power. Five different nozzles enable users to position airflow where desired and eliminate water spots.
Features Include:
8 Peak Horsepower Dryer unit on wheels with
12 foot cord
Rugged all Steel Construction
10-Foot Heavy Duty Hose
Heavy Duty Neoprene Blower
NozzleAir concentrator
Air streamer tool
Micro adaptor
Male/male adaptor
5 Piece Attachment Kit
1 YEAR WARRANTY
Construction: Sturdy All Steel
Motor: 8.0 Peak HP / Two Motors
Air Flow: 58,500 ft./min.
Fan: 2 Motors / 2 Stage Dual Fan
2 Speeds / 2 Temperatures
Amps: 18 Amps
Hose: 10ft. x 1.5 inch Commercial Strength Flexible Hose
Nozzle: Heavy Duty Neoprene Blower Nozzle
Cord: 12 ft. Heavy Duty 3 Conductor
Weight: 16 lbs.
Filter: E/Z Change Foam Filter
Attachments: Air Flare, Micro Adapter, 5/8" Blower Nozzle, Air Streamer Tool, 1-1/4 to 1-1/4 Hose Adaptor .
FEEDBACK
I have been allotted 20 units at a group discount and will pass these savings right on to you. So $20 off (no order only) the already heavily discounted Master Blaster and an extra years warranty, which makes it a 2yr warranty (the warranty also applies to all prior purchases)
For the next 20 orders only $289 ($100 of retail)
Add the Metro Hand vac for only $66 (an additional $9 savings)
Order ORDER LINK And Other Car Care Vacuums
CLICK TO VIEW VIDEO
All orders past and future now get a free extended warranty - order from me and get 2yrs (normally 1yr)
IF YOU ARE A NON BELIEVER READ THE MEMBER REVIEWS BELOW. We have sold 300 at this crazy low price and have 300 very happy customers. I know many have and use leaf blowers / compressors now, drying your car with them is like, setting the wifes blow dryer to cool and see how good she drys her hair.
I guarantee this will make you believer or send it back for a refund.
Yes you can blow out the trapped water on your car with a compressor / leaf blower. You can not 100% dry your car with them, I have tried.
You cannot completely dry your rotors so they don’t rust with a compressor. The air that exits the masterblaster is not only 2-3 times the velocity of a leaf blower; it’s 5-6 times the volume of a compressor.
The big trick is the air temp is 60-80deg above ambient temp (so if you’re drying your car and its 60deg out the air out of the master blaster is 120-140deg). It's more about "DRYING" the surface and not just pushing the water off (a leaf blower or compressor can't "DRY" the surface).
Have you ever tried to wash a dry your car went it cold and damp out? Then you have an idea of just how hard it is to get a dry surface.
I don’t want to spill the beans yet but Jay Leno has the unit now (200 motorcycles and 600+ cars) maybe the greatest car guy around. I have already spoken with him and his Mike (manages this car/bike collection) they can’t believe they have lived without it. I will be featured on a “Jay’s Garage Video Spot” in the next few months.
Order LINK And Other Car Care Vacuums
CLICK TO VIEW VIDEO
Like with all the other products I make or resell, I bring you the Air Force Master Blaster at over $90 off retail because I believe it’s an effective, quality product that I put into a “best in class standard”. You may be very happy with your leaf blower, water blade, or absorber, but you should read on.
All professional detailers will agree any time you touch you paint finish you add micro scratches that eventually lead to a dull finish. Of all the finishing steps, drying offers the most opportunity to damage the finish. In addition we all know about the dreaded drips from the many locations like tail lights and mirrors.
Personally, for years I have been using a combination of cotton, micro fibers, compressed air and leaf blowers. Leaf bowers are great and I am sure many of you use them. The problem is, not only are you blasting your car with unfiltered air that can contain all types of debris, the nozzle is a hard plastic that can easily scratch your car. In addition it’s difficult to maneuver the leaf blower just where you need it, like in the door jams, cowl, wheel wells.
I came upon the Air Force Master Blaster via a friend that uses it to dry all his vehicles by blow-drying them dry with high velocity heated air. If you think this is a winner on the car, you need to see it work on any motorcycle, ATV or even the family pet (yes all dog groomers use these to blow dry the dogs). In fact you will find tons of uses for the master blaster. I like blowing the mats clean instead of banging them against the tree, it leaves them fluffy.
I love the company that makes these, 70 yr old family business located in NY and the product is made in the USA and often described as bullet proof.
As a special I am bringing you the Air Force Master Blaster for only $309. Over $90 off the retail price. Please note this is a very high power system and requires a 110v 20amp outlet (which most garages have)
"There are always discussions on here about using a leaf blower to dry you car, your motorcyle, whatever. I wanted something deigned for the job at hand and also a dryer with heated air. I had always seen the Air Force One brand in my Harley magazines, so I finally took a look and found the Master Blaster. This thing puts out over 58,000fpm of heated air. It is amazing!
An email from a customer: Well I bought one and it is unreal! Was deliveried Thrusday afternoon, so that evening I washed the Electra Glide and the 08 Coupe. I hate washing the bike as it is a bitch to dry and with all the chrome I have, water spots can not be avoided. Then the Vette has all these little places where water likes to hide.
The bike was dry in no time and I found water hiding in places on the Vette that I never knew was there before, other than the obvious mirrors and such. With the high velocity air, you can dry out the wheel wells, the grill opening, around all the lights, under & around the hood, all body seams, the rear exhaust panel, wheel rim lug nut openings, backside of wheels and on and on. With the heated air, you are not just moving the water, you are DRYING the car. Was all done in about 15 minutes and a towel never touched the car. The heated air works so well that by the time I was done, it was starting to get pretty darn warm holding onto the end of the hose. Went out to the garage this morning and there was dust on the car. Turned on the Master Blaster and in 2 min, spotless again."
The bike was dry in no time and I found water hiding in places on the Vette that I never knew was there before, other than the obvious mirrors and such. With the high velocity air, you can dry out the wheel wells, the grill opening, around all the lights, under & around the hood, all body seams, the rear exhaust panel, wheel rim lug nut openings, backside of wheels and on and on. With the heated air, you are not just moving the water, you are DRYING the car. Was all done in about 15 minutes and a towel never touched the car. The heated air works so well that by the time I was done, it was starting to get pretty darn warm holding onto the end of the hose. Went out to the garage this morning and there was dust on the car. Turned on the Master Blaster and in 2 min, spotless again."
Order LINK
Air is heated 60deg above ambient and all the attchements are rubber so they can't damage your car. NOW Comes with a 2 YEAR WARRANTY.
The AirForce Master Blaster Dryer features a total of 8 peak horsepower. Two twin fan, 4.0 Peak horsepower motors that deliver up to 58,500 feet per minute of clean, filtered, warm airflow. Two switches allow users to set the airflow and temperature at 3 different levels. Use either motor (front or rear) independently or both simultaneously for maximum power. Five different nozzles enable users to position airflow where desired and eliminate water spots.
Features Include:
8 Peak Horsepower Dryer unit on wheels with
12 foot cord
Rugged all Steel Construction
10-Foot Heavy Duty Hose
Heavy Duty Neoprene Blower
NozzleAir concentrator
Air streamer tool
Micro adaptor
Male/male adaptor
5 Piece Attachment Kit
1 YEAR WARRANTY
Construction: Sturdy All Steel
Motor: 8.0 Peak HP / Two Motors
Air Flow: 58,500 ft./min.
Fan: 2 Motors / 2 Stage Dual Fan
2 Speeds / 2 Temperatures
Amps: 18 Amps
Hose: 10ft. x 1.5 inch Commercial Strength Flexible Hose
Nozzle: Heavy Duty Neoprene Blower Nozzle
Cord: 12 ft. Heavy Duty 3 Conductor
Weight: 16 lbs.
Filter: E/Z Change Foam Filter
Attachments: Air Flare, Micro Adapter, 5/8" Blower Nozzle, Air Streamer Tool, 1-1/4 to 1-1/4 Hose Adaptor .
FEEDBACK
Mine was delivered Thursday last. Over the weekend we drove to two get- together's in the DFW area.
Today (Sunday) it was apparent that they Verts needed to be washed - and dried.
This was the first time I've used the 'dryer' from Pipedreams - what a product it is Both Verts were washed and dried in less than two hours (total).
This included the engine compartments, as well as vacuuming the interior and putting the Verts into the garage and covering them
Today (Sunday) it was apparent that they Verts needed to be washed - and dried.
This was the first time I've used the 'dryer' from Pipedreams - what a product it is Both Verts were washed and dried in less than two hours (total).
This included the engine compartments, as well as vacuuming the interior and putting the Verts into the garage and covering them
I bought one and used it last weekend on both of my cars. It worked GREAT and actually made it FUN to dry your car. I was most impressed with how it removed all water from my rims/wheels.
I was able to apply tire dressing and polish my wheels immediately after the wash without having water still on the tires or dripping everywhere on my rims.
Now, I didnt use any of the nozzles, so I still need to experiment with those. It might be me, but the car just looked cleaner!!
I give this product a 5 star rating *****
I was able to apply tire dressing and polish my wheels immediately after the wash without having water still on the tires or dripping everywhere on my rims.
Now, I didnt use any of the nozzles, so I still need to experiment with those. It might be me, but the car just looked cleaner!!
I give this product a 5 star rating *****
just received mine today. I'm telling ya, guy's, this is a very nice tool, a major piece of garage gear ! I un-packed it while the spousal unit kind of chuckled and I took it out on the back deck and plugged it in, fired up both fans and knocked on the door to motion the spousal unit out to see this thing. She quickly grabbed it out of my hand and rolled it over to the outside patio table and comenced blowing it off
I can tell this thing is going to work reallly well drying the car's and the bike and it's made in the USA to boot
Thanks Ed
I can tell this thing is going to work reallly well drying the car's and the bike and it's made in the USA to boot
Thanks Ed
I bought the Master Blaster through Ed and have had it for about a month. I've used it to dry the Harleys and Z06. The heated high volume air works great. Much improved over the leaf blower - faster, easier to handle, no risk of scratching the paint and a better end result.
Many thanks to Ed for making this product available at such an attractive price.
Many thanks to Ed for making this product available at such an attractive price.
Last edited by SonOfDreams; 04-14-2009 at 09:39 AM.
04-14-2009, 09:30 AM
#3
Former Vendor
Thread Starter
Member Since: Sep 2008
Location: Brightwaters NY
Posts: 2,695
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09
04-14-2009, 10:13 AM
#5
Former Vendor
Thread Starter
Member Since: Sep 2008
Location: Brightwaters NY
Posts: 2,695
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09
04-14-2009, 01:56 PM
#6
Race Director
04-14-2009, 06:33 PM
#7
Burning Brakes
Just ordered your combo with the metro vac. Now to see if it works as well as you said. I asked about this the last time you posted and you got pretty nasty about it, taking it personal instead of answering the question of whether it traps the dust from the exhaust or throws it right back out. I like the use of a remote vacuum for that very reason. Let it blow the dust outdoors where it belongs. Home vacuums for the most part do the same thing, which is why your wife dusts after vacuuming, not before. In a car its worse, trying to clean the dust out of the vents, cracks, and crevices.
If there is a 20ft hose available, I'd like it too as 10ft isn't much. 5 ft up to my hand and that leaves a few feet to move about with. Not to mention setting it back away from the car 2-3 feet.
If there is a 20ft hose available, I'd like it too as 10ft isn't much. 5 ft up to my hand and that leaves a few feet to move about with. Not to mention setting it back away from the car 2-3 feet.
04-14-2009, 07:54 PM
#8
Former Vendor
Thread Starter
Member Since: Sep 2008
Location: Brightwaters NY
Posts: 2,695
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09
Just ordered your combo with the metro vac. Now to see if it works as well as you said. I asked about this the last time you posted and you got pretty nasty about it, taking it personal instead of answering the question of whether it traps the dust from the exhaust or throws it right back out. I like the use of a remote vacuum for that very reason. Let it blow the dust outdoors where it belongs. Home vacuums for the most part do the same thing, which is why your wife dusts after vacuuming, not before. In a car its worse, trying to clean the dust out of the vents, cracks, and crevices.
If there is a 20ft hose available, I'd like it too as 10ft isn't much. 5 ft up to my hand and that leaves a few feet to move about with. Not to mention setting it back away from the car 2-3 feet.
If there is a 20ft hose available, I'd like it too as 10ft isn't much. 5 ft up to my hand and that leaves a few feet to move about with. Not to mention setting it back away from the car 2-3 feet.
After you get it see if the extra hose is needed
04-15-2009, 07:04 AM
#9
Former Vendor
Thread Starter
Member Since: Sep 2008
Location: Brightwaters NY
Posts: 2,695
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09
04-20-2009, 05:25 PM
#12
Former Vendor
Thread Starter
Member Since: Sep 2008
Location: Brightwaters NY
Posts: 2,695
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09
04-21-2009, 01:14 PM
#13
Former Vendor
Thread Starter
Member Since: Sep 2008
Location: Brightwaters NY
Posts: 2,695
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09
I should have added. Anybody remotely considering this, who has more than 1 car...GET IT
I really didn't want to lay down the cash, but this thing looks like it's build like a tank.
Money well spent! I personally have 4 cars I try to keep as clean as possible, and the amount of time this will save me (let along b*tching about water spots) is worth the money in no time
I really didn't want to lay down the cash, but this thing looks like it's build like a tank.
Money well spent! I personally have 4 cars I try to keep as clean as possible, and the amount of time this will save me (let along b*tching about water spots) is worth the money in no time
04-21-2009, 10:19 PM
#14
I must say that I really really was not sure if this was a smart purchase but it was!!! I actually received the blaster and the vac'n/blo unit and both units are worth the money IMO!!! I have alrady used the vacuum around the garage and dried the dog after a bath!!! Many uses other than drying the beast!!Great product Ed 
04-25-2009, 10:07 AM
#15
Former Vendor
Thread Starter
Member Since: Sep 2008
Location: Brightwaters NY
Posts: 2,695
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09
04-26-2009, 10:42 PM
#16
Melting Slicks
just ordered!!!!!!!
04-30-2009, 07:18 AM
#19
Former Vendor
Thread Starter
Member Since: Sep 2008
Location: Brightwaters NY
Posts: 2,695
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09
some of the more recent feedback
Received my Master Blaster last week and got to use it for the first time on Saturday. Works WAY MO' BETTER than my leaf blower which has a 265MPH nozzle velocity!!! Car was completely dry and spot free in about 5 minutes and I never had to lay a towel on the car.
Totally indulgent purchase and worth every damn penny!!!!
U.M.
Totally indulgent purchase and worth every damn penny!!!!
U.M.
Tried mine out today and as with all things from PipeDreams and his son, this is a high quality item. Well built and much easier to use for drying a car than a leaf blower. I have used the leaf blower and the wife thought I was nuts buying ANOTHER blower. After seeing it in use today, she now understands why I needed ANOTHER blower.
Folks, if you can afford it, and like the idea of blow drying your car, this is THE product for you. You wont regret it.
Thanks to Pipedreams and son.
Folks, if you can afford it, and like the idea of blow drying your car, this is THE product for you. You wont regret it.
Thanks to Pipedreams and son.
I should have added. Anybody remotely considering this, who has more than 1 car...GET IT
I really didn't want to lay down the cash, but this thing looks like it's build like a tank.
Money well spent! I personally have 4 cars I try to keep as clean as possible, and the amount of time this will save me (let along b*tching about water spots) is worth the money in no time
I really didn't want to lay down the cash, but this thing looks like it's build like a tank.
Money well spent! I personally have 4 cars I try to keep as clean as possible, and the amount of time this will save me (let along b*tching about water spots) is worth the money in no time
05-03-2009, 04:49 AM
#20
Le Mans Master
Finally received mine and gave it a go today. It has lots of power but seems to take awhile to heat up the air. It did a good job of drying off the car but afterwards on the hood and flat hatch area there were some areas that looked like the water was allowed to air dry. It wasnt water spotting, something more on the lines as a sort of rough surface. This was easy to remove with a microfiber cloth and some detailing spray but I thought the purpose of the machine was so we could avoid hand drying or toweling afterwards?
Maybe I am doing something wrong. The sun was really intense today (73 in Alaska!) so I washed and dried the car in the garage to avoid the direct sunlight.
Comments or thoughts?
Maybe I am doing something wrong. The sun was really intense today (73 in Alaska!) so I washed and dried the car in the garage to avoid the direct sunlight.
Comments or thoughts?