Rejex problem

[Dkay]

I polished out minor flaws with #80 speed glaze with PC then rejexed- but I missed a few flaws - is it ok to take out flaws with speed glaze and then re-apply rejex? or do I need to clean all rejex from the panel first- thanks in advance DKAY -

[ripen ls6]

You should be ok. What kind of flaws are we talking here?
Is it something that M80 can correct? If so, then you can rejex when you're done. Just do a 50/50 IPA/H2O wipe down before you re-apply your M80.
If not, M83 should be enough, then go over with M80 and rejex.
HTH.
-m

[bugman]

agree - you don't have to worry about removing the sealant before you polish out scratches. Just make sure the area is clean - if any dust or road dirt, I'd prefer to re-wash before polishing again.