Maggie and 102 throttle body
#1
Melting Slicks
Thread Starter
Maggie and 102 throttle body
Just ordered a TB for my car a 102mm. Rob at Champion motors is going to port my snout to fit, got a 90mm on right now. o ya thanks Rob for the great deal!!!!What I want to know is anybody gone from a 90mm to 102mm and if so how much power did they see? Rob tells me that on ls7 n/a motors see something like 20rwh!!
#2
Former Vendor
Member Since: Nov 2002
Location: Toronto Ontario
Posts: 4,003
Likes: 0
Received 11 Likes
on
11 Posts
Just ordered a TB for my car a 102mm. Rob at Champion motors is going to port my snout to fit, got a 90mm on right now. o ya thanks Rob for the great deal!!!!What I want to know is anybody gone from a 90mm to 102mm and if so how much power did they see? Rob tells me that on ls7 n/a motors see something like 20rwh!!
#3
Safety Car
#5
Burning Brakes
Just ordered a TB for my car a 102mm. Rob at Champion motors is going to port my snout to fit, got a 90mm on right now. o ya thanks Rob for the great deal!!!!What I want to know is anybody gone from a 90mm to 102mm and if so how much power did they see? Rob tells me that on ls7 n/a motors see something like 20rwh!!
I did a 102, bigger CAI , and full 3" exhaust all at the same time.
But was retuned on a different Dyno, and went Speed density.
Lots of small changes, but biggest change IMHO, was the TB.
I saw 55 rwhp , and 10ftlbs rwtq increase .
Good luck
#6
Melting Slicks
Thread Starter
#7
Melting Slicks
Thread Starter
So how much power are you making and how much boost?
#10
Advanced
102 tb
Cant wait to see how this turns out.....just getting car back from Champion who added headers /cam....the 102 TB and some porting will be next ..... please keep us posted!
#11
Safety Car
#12
Advanced
I hope so....can't wait to go for a ride sadly it may be a while, its coming back on Monday in a trailer and back into hibernation. Again thanks to Rob and the guys at Champion for a job well done
#13
Melting Slicks
Thread Starter
I know how you feel!!!! Soon we can drive the cars! You made good power on pump gas, the 102mm tb should give us 20 to 30rwh. It was nice to meeting you.
#14
Melting Slicks
Thread Starter
#15
Advanced
Thanks...Great meeting you as well....here's hoping the furry little rodent was wrong and spring is just around the corner !!!
#17
Burning Brakes
If you already have a 2.4" snout pulley, and
An 8" drive pulley? I assume you rear cogs are
overdriven?
Just think 20lbs will be difficult on that little
blower ?
#18
Melting Slicks
Thread Starter
I've been making over 20lbs for years now, just never dynoed it, just street tunning.
#19
Melting Slicks
Thread Starter
#20
Melting Slicks
Thread Starter
Thats what they said with the new c7 z06. The 1.7 blower is to small and now L.M.R is making 765rwh and V.R is making 760rwh on 8lbs of boost. If you spin it, it will fly.https://www.corvetteforum.com/forums...ds-inside.htmlhttps://www.corvetteforum.com/forums...ngeance+racing
Last edited by FunCool; 02-10-2015 at 06:56 PM.