Z06 in for cams at Federal Performance
#1
Former Vendor
Thread Starter
Member Since: Dec 2014
Location: Montreal Quebec
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Z06 in for cams at Federal Performance
We've got a 2006 Z06 in our shop today. We will be installing new comp cams for him as well as doing a 94 & 91 octane tune. The car is stock besides the a Corsa cat back. We will dyno it before and after the cams so we can give you guys accurate power gain numbers!
Any guesses on before and after RWHP?
[IMG][/IMG]
Any guesses on before and after RWHP?
[IMG][/IMG]
#6
Former Vendor
Thread Starter
Member Since: Dec 2014
Location: Montreal Quebec
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Z06 Cam install Specs: Comp I:23X E:24X @ .050 115LSA .610 lift on the intake .630 lift on the exhaust and of course all of the components to with it to make it work reliably.
This is the first time we have put this cam in on a car with stock manifolds and cats instead of long tubes with high flow converters so I'm very curious to see the results.
Stay Tuned!
This is the first time we have put this cam in on a car with stock manifolds and cats instead of long tubes with high flow converters so I'm very curious to see the results.
Stay Tuned!
#7
Le Mans Master
Hmmm.....let's guess with 23x and 24x ?? Ok. Compression XX:1 ??
#8
Safety Car