*** Dasilva Motorsports Batman Build ***
#2
Safety Car
The title made me look
Some KRAY ZEE a$$ $h!t goin on up there in Breslau... (Where is Breslau)
I want a forged LS3 too....!
Some KRAY ZEE a$$ $h!t goin on up there in Breslau... (Where is Breslau)
I want a forged LS3 too....!
Last edited by dankhts; 04-15-2014 at 10:05 PM.
#3
#5
Melting Slicks
batta batta batta bataa batman!!!!!!!!!!!!! Now i hear Batman told Robin his dream is to go ......miles an hour in the quarter and run a ..... timeslip.Stay tuned !
#6
Race Director
Oh I could so hijack this thread right now.
My brother could have put that engine to good use last week.
What else ya got planned for that one Manny?
My brother could have put that engine to good use last week.
What else ya got planned for that one Manny?
#8
Former Vendor
Thread Starter
Member Since: Jun 2012
Location: Breslau Ontario
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
#10
Melting Slicks
Robin will be happy to report that the batmobile is now back in its hometown.Lets call up commissionner Gordon and see if there are any special assignements.Maybe a roll race with a couple of other supercharged vettes would be appropriate at this time.Once they have traction no one can make any excuses due to lack of traction or missing their start.80 kilometers an hour to 300 would be nice to see.
#11
Melting Slicks
I drove the batmobile on friday night as Bruce and i met up for his birthday.Took it for a nice ride on the highway and all i can say is this thing is on another level.You really have to watch at what speed you hit the gaz pedal as it lights up the tires at well over the speed limit.When cruising it feels totally tame almost as if it were stock.Let the tach go past 3000 rpm and you better make sure your last meal has been digested or your passenger will be wearing it.Great job Manny and Arun.
#12
Former Vendor
Thread Starter
Member Since: Jun 2012
Location: Breslau Ontario
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Phil , our engine combinations + Aruns extensive knowledge of tuning = No Limits .
If you truley want the best possible tune , you have to come to Dasilva Motorsports .
Arun is hands on every tune . He was at the shop until the wee hours making sure that Bruce's car was 100% . Now that is dedication .
Sent from my SM-N900W8 using IB AutoGroup
If you truley want the best possible tune , you have to come to Dasilva Motorsports .
Arun is hands on every tune . He was at the shop until the wee hours making sure that Bruce's car was 100% . Now that is dedication .
Sent from my SM-N900W8 using IB AutoGroup
#13
Salut !!! you just got work done at Dasilva's...So did I just got my car back yesterday... Heartbeat S/C - headers - exhaust & tune...Car is killer...Your build is pretty sick also... Hope to meet up one day !!!
#16
Le Mans Master
Manny
Post up the results and dyno sheet if you can.
I need to know what I'm up against !
Just kidding. But I am always curious of results on every type of build.
Post up the results and dyno sheet if you can.
I need to know what I'm up against !
Just kidding. But I am always curious of results on every type of build.
#17
Former Vendor
Thread Starter
Member Since: Jun 2012
Location: Breslau Ontario
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
#18
Le Mans Master
You normally post dyno sheets on your build threads and I just assumed one was coming. If you don't this time, no big deal.
Bruce seems happy with the car and that's all that really counts.
#19
Former Vendor
Thread Starter
Member Since: Jun 2012
Location: Breslau Ontario
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
Manny. I thought you would know by now, I dont care who would win a race, or even about the numbers. I do like to see power curves of different blowers and engine combinations. Eventually I will make changes and seeing different results will help my decisions.
You normally post dyno sheets on your build threads and I just assumed one was coming. If you don't this time, no big deal.
Bruce seems happy with the car and that's all that really counts.
You normally post dyno sheets on your build threads and I just assumed one was coming. If you don't this time, no big deal.
Bruce seems happy with the car and that's all that really counts.
We actually didn't have time for a video or even to get a graph up . It was late and Bruce still need to get back to Montreal . I will get the graph up up sometime this week .
#20
Le Mans Master
Cool. I wasn't sure if you were messing with me or Phil had posted under your name. LOL. Sounded like his line.