*** Dasilva Motorsports Batman Build ***
#21
Thanks Phil , our engine combinations + Aruns extensive knowledge of tuning = No Limits .
If you truley want the best possible tune , you have to come to Dasilva Motorsports .
Arun is hands on every tune . He was at the shop until the wee hours making sure that Bruce's car was 100% . Now that is dedication .
Sent from my SM-N900W8 using IB AutoGroup
If you truley want the best possible tune , you have to come to Dasilva Motorsports .
Arun is hands on every tune . He was at the shop until the wee hours making sure that Bruce's car was 100% . Now that is dedication .
Sent from my SM-N900W8 using IB AutoGroup
#22
Former Vendor
Thread Starter
Member Since: Jun 2012
Location: Breslau Ontario
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
Its been so busy that I am lagging behind on posting up results and some build details .
Here is what we did for Bruce :
Wiesco 10.1 forged pistons
Callies Compstar H Beam Rods
ARP2000 bolts
Stage 4 custom DMS Blower cam
Ported & Polished LS3 heads
BT Double Springs
Manley SS valves
Katech C5 Chain
Flipdrive
FAST 102 / Fast Rails + Bosh 1000's injectors
Tick Master
We made just over 812RW, before the we had a break down with the dyno electronics stack
We handed the car back to Bruce for his birthday , but it will be back for the final stage : smaller blower pulley & an Innovators West 10 rib .
Still this GS is one nasty beasty
I will certainly be putting Bruce's beast back on the rollers for an other run before we do the pulley's and post up .
For now Batman is enjoying his super quick GS
Here is what we did for Bruce :
Wiesco 10.1 forged pistons
Callies Compstar H Beam Rods
ARP2000 bolts
Stage 4 custom DMS Blower cam
Ported & Polished LS3 heads
BT Double Springs
Manley SS valves
Katech C5 Chain
Flipdrive
FAST 102 / Fast Rails + Bosh 1000's injectors
Tick Master
We made just over 812RW, before the we had a break down with the dyno electronics stack
We handed the car back to Bruce for his birthday , but it will be back for the final stage : smaller blower pulley & an Innovators West 10 rib .
Still this GS is one nasty beasty
I will certainly be putting Bruce's beast back on the rollers for an other run before we do the pulley's and post up .
For now Batman is enjoying his super quick GS
Last edited by Dasilvamotorsports; 04-27-2014 at 04:17 PM.