Hey Mark, wondering if you are still coming out to Dyno day. I will bring my tools so we can install your shifter just in case. I am leaving Oakville at 8am to be at Redline for 9am. I will need to leave Redline to go home by around noon.. See you there or you can call me on my cell.
Steve
__________________
01 C5, Forged 383 Stroker, 232/241 Crower cam, Ported Heads, FAST 92/LS2-90, LG Pro LT Headers, Corsas, Canton Accusump, ATI Damper, Moton Coilovers, SKF Hubs, Hotchkiss Bars, LG Endlinks, AP T1 Race Brakes, RPM Diff & Trans - 3.90 Gears , Pfadt Poly Bushings and Engine mounts, Dewitt Rad/EOC, Powell Spindel Ducts, Centerforce DFC Clutch, Caravaggio Hood, Front Canards and Rear Spoiler, Powell 6point Rollbar, Corbeau FX1 Pros,
Will be there. I'll probably be leaving around the same time. I'll try your cell and see about meeting up. Possibly at around Weston and 401. There is a Tim Hortons just off the exit ramp. The Gardiner is supposed to be closed all weekend.
Will be there. I'll probably be leaving around the same time. I'll try your cell and see about meeting up. Possibly at around Weston and 401. There is a Tim Hortons just off the exit ramp. The Gardiner is supposed to be closed all weekend.
Mark
Sounds good....gimme a call, I will be meeting up with AGVI here in Oakville.. Am I bringing tools or are you? doesnt matter..see you tomorrow
Corvette Store
[PAGING] MYRagtop
