Official : The ZR1 is coming this summer
#1
Burning Brakes
Thread Starter
Official : The ZR1 is coming this summer
The following users liked this post:
Torque Obsessed (04-10-2024)
#3
Man that doesn't sound FPC!
The following 4 users liked this post by RapidC84B:
#4
Can anyone do frame capture and see the shape of the wing in the blacout as the car comes through the mist? I think it's a Z07 Z06 profile. Not the big flat profile.
EDIT WRONG!!! See below
EDIT WRONG!!! See below
#5
I got it!
The following 8 users liked this post by RapidC84B:
AFNikki (04-10-2024),
ChevyChad (04-10-2024),
CPhelps (04-10-2024),
Electron Mike (04-10-2024),
hamta (04-10-2024),
and 3 others liked this post.
#6
Melting Slicks
I saw the wing and had it paused at about the same frame shown there. I also noticed it has canards and similar widebody panels and front fascia we are all already familiar with from the Z06 and E-Ray. At least from what I could see in the silhouette.
The following 3 users liked this post by zich6:
#9
Banned Scam/Spammer
The following users liked this post:
NK-minnesota (04-11-2024)
#10
If you haven't been on a ZR1 list for years now you're not getting one unless you can pay a significant ADM.
The following 4 users liked this post by RapidC84B:
#11
CorvetteForum Editor
On YouTube Desktop, you can scrub frame by frame using the comma and period keys.
Here's the close-up of the front end with the shadows raised, you can see the canards.
The following 7 users liked this post by Palmer:
AFNikki (04-10-2024),
ChevyChad (04-10-2024),
Electron Mike (04-10-2024),
foundvettelifeisgood (04-11-2024),
hamta (04-10-2024),
and 2 others liked this post.
#12
Tech Contributor
Member Since: Mar 1999
Location: Northern VA
Posts: 10,092
Received 3,853 Likes
on
1,161 Posts
"Ask Tadge" Producer
The following 6 users liked this post by jvp:
2cnd Chance (04-10-2024),
hamta (04-10-2024),
JABCAT (04-10-2024),
Landru (04-10-2024),
Xanthophyll (04-10-2024),
and 1 others liked this post.
#13
Melting Slicks
Good luck finding a ZR1 list that is not already full. Those who want one bad enough are already on lists where available, so the impact is kind of already baked into the existing Z06 lists. I know MacMulkin has not started an official list, all they have is a list of people to notify once they determine how they are going to make their list. Then it will be a $#!+ show much like it was with the E-Ray list, and how Ciocca did their Z06 list. So many people ready to jump on the chance to send a deposit. Many feelings will be hurt very quickly. I can't afford a ZR1 anyway, so I am on the sidelines watching.
#14
Based on the ring we know what the car is... but this confirms (or seems to) that the big wing isn't some placeholder for a different design. The front end is the same as Z06/7 but hood is vented. Sides is where it gets different w/ the trailing tail vent in the side inlet and the inlet on the decklid.
#15
For predominately street use I'm not sure this offers anything over a Z06.
The following 2 users liked this post by Bluehinder:
JustnRiptide (04-10-2024),
zland (04-15-2024)
#16
The following 24 users liked this post by RapidC84B:
23/C8Z (04-10-2024),
70lt102z06 (04-10-2024),
blackbirdws6 (04-10-2024),
Buddhaman (04-10-2024),
ChevyChad (04-10-2024),
and 19 others liked this post.
#18
Tech Contributor
Member Since: Mar 1999
Location: Northern VA
Posts: 10,092
Received 3,853 Likes
on
1,161 Posts
"Ask Tadge" Producer
I'm not sure what you're trying to get at here. You mentioned "limited production" which implies a purposeful thing. That's not what GM does with Corvettes or any of their cars. They will build as many of them as the line (and supplies) allow for it.
#19
Melting Slicks