When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If I get aftermarket wheels I'd want to go smaller for weight savings, I track a lot. The problem isn't finding the wheels it's finding tires with the same diameter and width cross section as OEM. I have not found any to date.
Okay so I will say this, unless you have the carbon fiber wheel what we have seen is the standard OEM C8 Z06 wheels aren't actually truly forged more of a Hybrid or Rotary forged wheel some say they even way up to 29 pounds front and 34 almost 35 pounds rear. So hypothetically if you were to get a set of Custom fully forged Monobloc wheels from us in OEM configuration you would shed about 7-9 pounds or so which in rotational mass terms is a massive cut and you would feel the difference. Hope this helps you out even a little if any!
Signature Forged 20/21 setup with stock PS4s. Went as aggressive as possible on fitment/offset for as much lip as possible with plans to lower/partial track alignment.
Wheel gap looks worse than stock wheels so cannot lower it fast enough lol
Signature Forged 20/21 setup with stock PS4s. Went as aggressive as possible on fitment/offset for as much lip as possible with plans to lower/partial track alignment.
Wheel gap looks worse than stock wheels so cannot lower it fast enough lol
If I get aftermarket wheels I'd want to go smaller for weight savings, I track a lot. The problem isn't finding the wheels it's finding tires with the same diameter and width cross section as OEM. I have not found any to date.
I'm having this dilemma as well. Non-Z07 just swapped over to the Cup 2Rs on stock rims, track alignment and after 2 days they already look like slicks, I think I can squeeze one more day out of them. At $2500 a set w/installation my 30-40 track days per yr are going to get a bit pricey. Every combination of wheel size I've played with has very limited tire availability.
I'm having this dilemma as well. Non-Z07 just swapped over to the Cup 2Rs on stock rims, track alignment and after 2 days they already look like slicks, I think I can squeeze one more day out of them. At $2500 a set w/installation my 30-40 track days per yr are going to get a bit pricey. Every combination of wheel size I've played with has very limited tire availability.
You replied to your own post, about a month after you made it haha
You replied to your own post, about a month after you made it haha
I am old, not yet feeble, and my short term memory has never been great. The reason I responded w/o remembering my 1st post was the cup2Rs look like below after 2 track days and at $2500 a set & track 30 +/- times a season the tire budget is looking a bit daunting. I died 4 days on the OEM 4S tires to get the feel for the car but they are not up to the task re: track. It would be nice to have some choices in 180-200 west range.
Looking to change up the look of your C8-Z06 without breaking the bank ? We are producing right now our Velgen Light Weight Series VF10 20x10 F / 21x13R We will be offering the following finishing Gloss Black / Gloss Gunmetal / Brushed Clear. We know you guys like to haul ***, so we also have decided to add to the wheels " Anti Slip Knurling Ring " First Batch Arrives end of March. Let us know your thoughts. 21x13 Wheel Weight 31 LBS.
Hey everyone been a while since we been in here but gonna start getting active again. Here is some shots of another C8 Z06 we did on some 3 piece 20/21s for you all!
09-18-2023, 10:36 AM
Wheel Weight
