New Z06 Tuning Fork Z06 wheels now in stock for C8 Corvette
#41
Supporting Vendor
Thread Starter
#42
Supporting Vendor
Thread Starter
The following users liked this post:
Carlos@mrrwheels (05-18-2022)
The following 2 users liked this post by n44dp:
ATC (05-20-2022),
Carlos@mrrwheels (05-18-2022)
#46
Supporting Vendor
Thread Starter
#47
Supporting Vendor
Thread Starter
#48
Supporting Vendor
Thread Starter
FYI guys we have 7 sets of Graphite available and we have 12 sets in Gloss black
Ones these sell out our next shipment comes in 3-4 weeks tops, after that comes in is 8 weeks wait time.
Ones these sell out our next shipment comes in 3-4 weeks tops, after that comes in is 8 weeks wait time.
The following users liked this post:
Carlos@mrrwheels (05-18-2022)
#50
Drifting
Some know our story but for those that don't...... trust me you can find a lot of my history on this forum, I personally started researching the C8 wheel specs way way before any car was out in production, different contacts with friends and associates helped along the way, long story short we made specs for the C8 that fit flush and with zero mods required, those same specs are done through out our wheel line up so. if you order a 19x8.5/20x11 FS06, M755, FS01 or any other wheel it will be built to those same identical specs so the fitment is the same all around. Also we did the proper modifications for 19x9.5/20x112 fitments and also for the 20x9/21x12 and 21x9.5/21x12 plus recently with johns help we also establish an amazing track set up in a 18x10/18x12 configuration.
#51
Supporting Vendor
Thread Starter
Hey Carlos, that is really interesting. So how did you determine the correct offset specs for the MRR line of wheels for the C8? Was there a point where you thought, "that's too much offset" vs "that's not enough offset"? I'm curious to know what was the criteria you used to settle on the specs you use now. Or was it more about just eyeballing it until you felt you got it visually right?
The following users liked this post:
dreamr616 (05-18-2022)
#52
Pro
Can I get a quote for diamond cut/sports grey C8 wheels to SoCal?
Thanks!
Thanks!
The following users liked this post:
Carlos@mrrwheels (05-19-2022)
The following users liked this post:
Carlos@mrrwheels (05-19-2022)
The following users liked this post:
Carlos@mrrwheels (05-19-2022)
The following users liked this post:
Carlos@mrrwheels (05-19-2022)
The following users liked this post:
Carlos@mrrwheels (05-19-2022)
#57
Supporting Vendor
Thread Starter
#58
Supporting Vendor
Thread Starter
#59
Supporting Vendor
Thread Starter
#60
Supporting Vendor
Thread Starter