low profile spoiler
The following users liked this post:
Erick_ADUSA (07-28-2023)
#2
Drifting
I assume you know that that spoiler is is a GM licensed accessory (part# 19432036) by AirDesign, installed using tape (no bolts). Nothing wrong with that just that it is different from the RPO option low spoiler which is bolted on.
#3
Racer
Thread Starter
will the install last or will it come off during time?
#4
#5
Safety Car
Member Since: Dec 2009
Location: Oro Valley Arizona
Posts: 3,580
Received 2,379 Likes
on
1,168 Posts
C8 Forum For Sale listing
Paragon real carbon fiber low spoiler by straker. worth a look.
#6
Racer
The following users liked this post:
Mike Campbell (03-08-2022)
#7
Drifting
I’ve had the spoiler on my car since September of last year. I can tell you It isn’t coming off without some serious effort. I drove 75 mph approximately 45 min after installing it and it didn’t budge. It’s very light weight and it doesn’t stick up much above the body of the car. The chance of air ripping it off is extremely unlikely.
#8
Racer
Thread Starter
#9
Racer
Thread Starter
I’ve had the spoiler on my car since September of last year. I can tell you It isn’t coming off without some serious effort. I drove 75 mph approximately 45 min after installing it and it didn’t budge. It’s very light weight and it doesn’t stick up much above the body of the car. The chance of air ripping it off is extremely unlikely.
than you sir for your answer.
The following users liked this post:
tadda (03-06-2022)
#12
Burning Brakes
I don’t like it at all. It just doesn’t look right. Either go with no spoiler or the Z51 style. In my opinion the C8 looks great without any spoiler but I know for a lot of you a spoiler is a must have on any car.
The following users liked this post:
papillion (03-06-2022)
#14
Drifting
Here’s are pre and post splitter spoiler photo.
#16
Racer
Thread Starter
I respect your opinion. Initially I thought my C8 looked good minus the splitter and spoiler too. Then I starting noticing all the C8s with ground affects had a better stance than mine. I think the splitter made it look like they were sitting closer to the ground. I added the splitter to mine, but then I thought my car looked front heavy and needed a spoiler to balance it out. I don’t like the standard Z51 spoiler and high wing looks kind of out-of-place on the C8 in my opinion. Plus I didn’t want to have to reach over the high wing every time I needed to get something out the trunk. I thought the low profile accessory spoiler added the perfect balance to the car. And the fact that it was already painted carbon flash and required no drilling made it a no brainer.
Here’s are pre and post splitter spoiler photo.
Here’s are pre and post splitter spoiler photo.
#17
I’ve had the spoiler on my car since September of last year. I can tell you It isn’t coming off without some serious effort. I drove 75 mph approximately 45 min after installing it and it didn’t budge. It’s very light weight and it doesn’t stick up much above the body of the car. The chance of air ripping it off is extremely unlikely.
#18
Safety Car
Member Since: Dec 2009
Location: Oro Valley Arizona
Posts: 3,580
Received 2,379 Likes
on
1,168 Posts
tastee...
I love the HRE FFs.
I’ve had the spoiler on my car since September of last year. I can tell you It isn’t coming off without some serious effort. I drove 75 mph approximately 45 min after installing it and it didn’t budge. It’s very light weight and it doesn’t stick up much above the body of the car. The chance of air ripping it off is extremely unlikely.
The following 5 users liked this post by DonaldK:
1SlowC5 (05-24-2023),
jeffreyallan1234 (03-07-2023),
nhlgopens (03-08-2022),
Q Pilot (04-11-2022),
syoungbe (03-08-2022)