Still no diecast models of the C8 Corvette, quite unusual
#21
Le Mans Master
Okay, for you bucks up entrepreneurial types, here is how this works. Go to Hum3D, 2020 Corvette page, buy the 3D file for 75 euros, invest in the detailed interior for 600 euros, then get a 3D print ready STL file for 300 euros. Find a 3D print house, Shapeways is the big one, check their forums and find an expert to get it ready, then start cranking those babies out in any scale you want. First to market makes the big bucks! Hurry!!
PS - Missed out on a model of this one in your favorite scale? Hum3D has it, too:
PS - Missed out on a model of this one in your favorite scale? Hum3D has it, too:
#23
Melting Slicks
Thread Starter
Still crickets......
nothing yet in pictures or otherwise in ANY scale.. 1/18 1/64 nothing.
Very unusual
whaz up wit that ??
nothing yet in pictures or otherwise in ANY scale.. 1/18 1/64 nothing.
Very unusual
whaz up wit that ??
The following 3 users liked this post by ZeroDark30:
The following users liked this post:
kratedisease (11-14-2019)
#27
They're tweaking the DCT, dialing out the oppressive understeer, expanding the footwell to accommodate a clutch pedal while redesigning the central tunnel for the manual gearbox. Additionally, they're searching for a micro Randy Pobst to test flog the final model.
Don't get me started about the Z-cars.
Don't get me started about the Z-cars.
Last edited by Resume18; 11-14-2019 at 01:48 PM. Reason: clarity
The following users liked this post:
2vette2 (11-15-2019)
#28
There was a miniature strike.
The following 5 users liked this post by Aerovette:
bodak1 (02-24-2020),
Old-Timer (02-24-2020),
Rapid Fred (11-17-2019),
tcinla (11-14-2019),
Weasel (11-15-2019)
#30
Melting Slicks
Member Since: Oct 2005
Location: Hailing From The Mean Streets Of Irvine, California
Posts: 3,100
Received 4,153 Likes
on
1,314 Posts
The Corvette C8 Diecast isn't available yet, but you can get the 1/64 Scale Truck Hauler.....
Save The Wave,
Corvette_Nut
Save The Wave,
Corvette_Nut
#31
Melting Slicks
#33
Drifting
HOT NEWS - C8 Model Sightings
From the Facebook page 'Corvette Diecast, Models, and Collectibles' -
"Matchbox has a prototype we've seen, but nothing out on the market yet that I know of."
So we can assume that one is in the sorta "1:64ish" scale of the typical Matchbox car (you know that 'scale', it's the one where dump trucks and Mini Coopers fit in the same size package.).
Quote:
Originally Posted by trivette
I'm betting Maisto being first as well; that's been the case for the last several generations. The China situation could play into any delays.
And you are on target:
Quote:
Originally Posted by Halewafa
Would be great if one of the higher end brands (AutoArt, BBR, CMC, Kyosoho) would make it, really hoping it's not a Maisto...
Actually, I'm on your side but Maisto is a mass market source and the best way to get lots of models to public worldwide. We can hope for something classier later.
From the Facebook page 'Corvette Diecast, Models, and Collectibles' -
"Matchbox has a prototype we've seen, but nothing out on the market yet that I know of."
So we can assume that one is in the sorta "1:64ish" scale of the typical Matchbox car (you know that 'scale', it's the one where dump trucks and Mini Coopers fit in the same size package.).
Quote:
Originally Posted by trivette
I'm betting Maisto being first as well; that's been the case for the last several generations. The China situation could play into any delays.
And you are on target:
Quote:
Originally Posted by Halewafa
Would be great if one of the higher end brands (AutoArt, BBR, CMC, Kyosoho) would make it, really hoping it's not a Maisto...
Actually, I'm on your side but Maisto is a mass market source and the best way to get lots of models to public worldwide. We can hope for something classier later.
The following users liked this post:
Weasel (11-16-2019)
#35
In order to time the launch of a scale model close to the launch of a new car, they need CAD drawings 6-12 month before launch. This has bitten a number of European manufacturers in the butt when photos of the model leak before the debut of the actual car. My guess is Chevy wanted to keep this under wraps till the debut of the car. Waiting a bit longer won’t kill anyone... 😁
#37
Race Director
Member Since: Sep 2003
Location: For the strength of the pack is the wolf . . . . . . and the strength of the wolf is the pack.
Posts: 18,368
Received 141 Likes
on
102 Posts
Mint Models is advertising the black one, and a red one, "Manufactured Exclusively for Mint Models in 1:18 Scale by Topspeed." on their site.
https://www.mintmodels.com/2020Corve...m_medium=email
The price isn't bad for a resin model.
This finished model has a black interior, red brake calipers, and the red Z51 spoiler wing.
This 2020 Corvette C8 Coupe Limited Edition model is an authentic 1:18 scale replica of the 2020 Corvette. This precision engineered model is crafted from the finest resin materials available and finished by hand. This model is issued in a strictly Limited Edition of 299 models worldwide, and is exclusively available through Mint Models. This model comes on a custom base.
This is the newest release in the series of Mint Models Exclusive Corvettes. RESERVE NOW! ETA is March 2020. Pre-Order Only Price of $149.95
This all-new mid-engine sports car is so much more than the Next Generation, it’s next level. At once precise and powerful, the Corvette Stingray Coupe and has been completely redesigned from the ground up to deliver a thrill on every drive.
The model comes complete as shown, there are no moving parts or opening parts.
https://www.mintmodels.com/2020Corve...m_medium=email
The price isn't bad for a resin model.
Detailed Description
The Mint Models Exclusive 2020 Corvette Stingray C8 Mid Engine Coupe in Torch Red. Manufactured Exclusively for Mint Models in 1:18 Scale by Topspeed. This is a fine High End Resin Model that is fully authorized and authenticated by the GM and Chevrolet Licensing Teams. This C8 Corvette in Torch Red is hand painted with real automotive quality paint and has a gorgeous high gloss finish.This finished model has a black interior, red brake calipers, and the red Z51 spoiler wing.
This 2020 Corvette C8 Coupe Limited Edition model is an authentic 1:18 scale replica of the 2020 Corvette. This precision engineered model is crafted from the finest resin materials available and finished by hand. This model is issued in a strictly Limited Edition of 299 models worldwide, and is exclusively available through Mint Models. This model comes on a custom base.
This is the newest release in the series of Mint Models Exclusive Corvettes. RESERVE NOW! ETA is March 2020. Pre-Order Only Price of $149.95
This all-new mid-engine sports car is so much more than the Next Generation, it’s next level. At once precise and powerful, the Corvette Stingray Coupe and has been completely redesigned from the ground up to deliver a thrill on every drive.
The model comes complete as shown, there are no moving parts or opening parts.
Last edited by RPOZ51; 11-21-2019 at 10:01 AM.